Ryobi R180 Manuel de l'opérateur télécharger pdf (Page 6)

Page 6

ROUTER MOUNTING

Fig. 4

GUARD/DUST COVER WITH

PIVOT ASSEMBLY

KNOB NUT

FLATS ON

POST

KNOB

BOLTS

5/16 in.

WASHERS

GUIDE FENCE

BRACKET

RIP FENCE

T-NUTS

CARRIAGE BOLT

(NOT SHOWN)

SPACER

Fig. 5

ROUTER

MOUNTING

SCREWS

ROUTER

MOUNTING

PLATE

ROUTER WITH 2–HOLE PATTERN

SUBBASE

ROUTER

BASE

TO INSTALL GUIDE FENCE BRACKETS:

■ To install the guide fence brackets, align each bracket

with two of the T-nuts on top of the rip fence.

See

Figure 4.

Note: Use the front two T-nuts and the back two T-

nuts leaving the one in the middle empty.

■ Secure the guide fence brackets to the rip fence with

5/16 in. washers and the 5/16 in. x 1/2 in. knob bolts.

TO INSTALL POST, GUARD/DUST COVER

WITH PIVOT ASSEMBLY:

■ Place the spacer on the threaded end of the post and

thread the post into the remaining T-nut.

See Figure 4.

■ Tighten the post securely with an adjustable wrench

on the flats on the top of the post.

■ Place the guard/dust cover with pivot assembly on

the post.

See Figure 4.

■ The assembly will slide up and down on the post as

needed. Secure at the desired location by tightening

the knob nut attached to the carriage bolt.

TO ASSEMBLE ROUTERS WITH 2-HOLE

PATTERN TO ROUTER MOUNTING PLATE:

See Figures 5 and 6.

Note: For Ryobi routers, model numbers R175 and

RE175. Model R175 must also use #4830175 depth

control kit.

■ Unplug the router.

WARNING: Unplug the router to avoid

possible injury.

■ The black plastic subbase is glued to the router

base. Do not remove. Make sure the router switch is

OFF and the router is not connected to a power

source.

■ Place the router upside down on a workbench and

align mounting holes of the mounting plate with the

two threaded holes in the router base.

■ The switch handle of the router should be facing the

squared end of the mounting plate.

See Figure 5.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Commentaires sur ces manuels

Pas de commentaire

Ryobi R180 Manuel de l'opérateur Page 6

Commentaires sur ces manuels