Ryobi RT501W Spécifications télécharger pdf (Page 11)

ASSEMBLY

Fig. 3

TO ATTACH THE SWITCH BOX

See Figure 3

4. Place the router table on its legs.

5. Use a #2 Phillips screwdriver to attach switch box (G) to

the switch box bracket with 3 self tapping screws (AF).

To attach screws, washers and nuts for

mounting router

See Figure 4

6. Place the 4 flange nuts (U) in the 4 countersink holes of the

tabletop.

7. Insert the 4 countersink screws (AC) through holes in table

top. Tighten securely with the 4 hex nuts (AD) placing the

4 washer (AE) between the nuts (AD) and the tabletop.

Use an adjustable wrench or a combination wrench

(size 10 mm) to tighten the nuts (the detail in figure 4

shows the finished assembly).

8. Press the 4 caps (K) to cover the heads of the

countersink screws.

NOTE: Press the caps down until they are flush with table

top.

AF (3)

AC (4)

AD (4)AE (4)

Fig. 4

CAUTION:

If you choose not to use the universal router mounting

system, simply remove the associated hardware (AD,

AE, U, AC), but keep the caps (K) in place.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Pas de commentaire

Ryobi RT501W Spécifications Page 11