Ryobi RT501W Spécifications télécharger pdf (Page 17)

MOUNTING THE ROUTER

See Figure 19

9. Position all 4 clamps on the adapter plate and tighten

securely with the 4 knobs.

10. Place the router table on its legs.

NOTE: Use a minimum of 3 clamps to secure the router

to the table.

NOTE: Routers larger than 2Hp should be mounted direct-

ly to the table top with mounting screws as described on

page 15.

NOTE: To remove the router when using the universal

clamping system, it may be necessary to disassemble one

or more of the clamps that secure the router to the table

top.

Fig. 19

See Figure 18

8. Place clamp (R), swivel piece (Q), washer (AE), and

knob (S) on screw (AC) as shown. Leave assembly

loose to allow clamp to be adjusted. Repeat the above

procedures for the 3 remaining clamps.

Fig. 18

AE (4)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Pas de commentaire

Ryobi RT501W Spécifications Page 17