Ryobi P542 Manuel d'utilisateur télécharger pdf (Page 24)

24 - English

MAINTENANCE

GUIDE BAR MAINTENANCE

See Figure 39.

When the guide bar shows signs of wear, reverse

it on the saw to distribute the wear for maximum

bar life. The bar should be cleaned every day of

use and checked for wear and damage.

Feathering or burring of the bar rails is a normal pro-

cess of bar wear. Such faults should be smoothed

with a file as soon as they occur.

A bar with any of the following faults should be

replaced.

 Wear inside the bar rails which permits the chain

to lay over sideways.

 Bent guide bar.

 Cracked or broken rails.

 Spread rails.

In addition, guide bars with a sprocket at their tip

must be lubricated weekly with a grease syringe to

extend the guide bar life. Using a grease syringe,

lubricate weekly in the lubricating hole.

Turn the guide bar and check that the lubrication

holes and chain groove are free from impurities.

TRANSPORTING AND STORING

See Figure 40.

 Do not store or transport the chain saw when

it is running. The chain saw should always be

idle before storing or transporting.

 Always place the guide bar scabbard on the

bar and chain before storing or transporting the

chain saw. Use caution to avoid the sharp teeth

of the chain.

 Clean the chain saw thoroughly before storing.

Store the chain saw indoors, in a dry place that

is locked and/or inaccessible to children.

 Keep away from corrosive agents such as gar-

den chemicals and de-icing salts.

RESTORE ORIGINAL

SHAPE BY ROUNDING

THE FRONT

FLAT FILE

DEPTH GAUGE jOINTER

Fig. 37

Fig. 39

LUBRICATING HOLE

Fig. 38

Fig. 40

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 75 76

Commentaires sur ces manuels

Pas de commentaire

Ryobi P542 Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Outil à essence Ryobi P542