Ryobi RY43006 Manuel d'utilisateur télécharger pdf (Page 3)

GENERAL SAFETY RULES

READ ALL INSTRUCTIONS

BASIC SAFETY PRECAUTIONS

n Do not start cutting until you have a clear work area, se-

cure footing, and a planned retreat path from the falling

tree. Cluttered areas invite accidents.

n Keep ALL children, bystanders, visitors, and animals out

of the work area while starting or cutting with the chain

saw.

n Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases, or

dust. Power tools create sparks which may ignite the dust

or fumes.

When operating a power tool outside, use an outdoor

extension cord marked “W-A” or “W”. These cords are rated

for outdoor use and reduce the risk of electric shock.

n Polarized Plugs. To reduce the risk of electric shock,

this tool has a polarized plug (one blade is wider than

the other). This plug will fit in a polarized outlet only one

way. If the plug does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a qualified electrician

to install the proper outlet. Do not change the plug in any

way.

n Make sure your extension cord is in good condition. When

using an extension cord, be sure to use one heavy enough

to carry the current your product will draw. A wire gauge

size (A.W.G.) of at least 12 is recommended for an exten-

sion cord 50 feet or less in length. A cord exceeding 100

feet is not recommended. If in doubt, use the next heavier

gauge. The smaller the gauge number, the heavier the

cord. An undersized cord will cause a drop in line voltage

resulting in loss of power and overheating.

n Inspect extension cords periodically and, if damaged,

have repaired by a licensed electrician. Constantly stay

aware of cord location. Following this rule will reduce the

risk of electric shock or fire.

n Wear snug fitting clothing. Always wear heavy, long pants,

overalls, jeans or chaps made of cut resistant material or

ones that contain cut resistant inserts. Wear non-slip safety

footwear. Wear non-slip heavy duty gloves to improve

your grip and to protect your hands. Do not wear jewelry,

WARNING:

Do not attempt to operate this unit until you have read

thoroughly and understand completely all instructions,

safety information, etc. contained in this manual. Failure

to comply can result in accidents involving fire, electric

shock, or serious personal injury.

short pants, sandals, or go barefoot. Do not wear loose

fitting clothing, which could be drawn into the motor or

catch the chain or underbrush. Secure hair so it is above

shoulder level.

n Wear eye protection which is marked to comply with ANSI

Z87.1 as well as hearing and head protection when oper-

ating this equipment.

n Always be aware of what you are doing when using the

chain saw. Use common sense. Do not operate the chain

saw when you are tired, ill, or under the influence of al-

cohol, drugs, or medication.

n Do not expose the chain saw to rain.

n Do not use the chain saw in damp or wet locations.

n Always be aware of extension cord while operating chain

saw. Take precautions to avoid tripping over cord. Keep

cord away from chain and operator at all times. Never carry

saw by the cord or pull it to disconnect from receptacle.

Keep cord from oil and sharp edges.

n Stay alert and pay attention to what you are doing. Use

common sense when using this unit.

n Keep all parts of your body away from the saw chain

when the unit is running.

n Always carry the chain saw by the front handle with the

unit unplugged and the guide bar and saw chain positioned

to the rear. When transporting your chain saw, use the

appropriate guide bar scabbard.

n Never let anyone use your chain saw who has not received

adequate instructions in its proper use. This applies to

rentals as well as privately owned saws.

n Before you start the unit, make sure the saw chain is not

contacting any object.

n Stop the chain saw before setting it down.

n To avoid accidental starting, never carry the unit with your

finger on the switch trigger.

n Maintain the unit with care. Keep the cutting edge sharp

and clean for best performance and to reduce the risk

of injury. Follow instructions for lubricating and changing

accessories.

n Keep handles dry, clean, and free of oil and grease.

n Do not operate a chain saw with one hand! Use a firm grip

with thumbs and fingers encircling the chain saw handles.

Serious injury to the operator, helpers, bystanders, or any

combination of these persons may result from one-handed

operation. A chain saw is intended for two-handed use.

1 2 3 4 5 6 7 8 ... 29 30

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY43006 Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Outil à essence Ryobi RY43006