Ryobi P205 Manuel de l'opérateur télécharger pdf (Page 13)

1 − English

Fig. 11

MAINTENANCE

CHUCK REMOVAL

See Figures 9 - 11.

The chuck may be removed and replaced by a new one.

Lock the switch trigger by placing the direction of rotation

selector in center position.

Insert a 5/16 in. or larger hex key into the chuck of the

drill and tighten the chuck jaws securely.

Tap the hex key sharply with a mallet in a clockwise

direction. This will loosen the screw in the chuck for easy

removal.

Open the chuck jaws and remove the hex key. Using a

screwdriver, remove the chuck screw by turning it in a

clockwise direction.

NOTE: The chuck screw has left hand threads.

 Insert the hex key into the chuck and tighten the chuck

jaws securely. Tap sharply with a mallet in a counterclock-

wise direction. This will loosen the chuck on the spindle.

It can now be unscrewed by hand.

TO RETIGHTEN A LOOSE CHUCK

The chuck may become loose on the spindle and develop

a wobble. Also, the chuck screw may become loose, caus-

ing the chuck jaws to bind and prevent them from closing.

To tighten:

Lock the switch trigger by placing the direction of rotation

selector in the center position.

 Open the chuck jaws.

Insert the hex key into the chuck and tighten the chuck

jaws securely. Tap the hex key sharply with a mallet in

a clockwise direction. This will tighten the chuck on the

spindle.

Open the chuck jaws and remove the hex key.

Tighten the chuck screw.

Fig. 9

mAlleT

ChuCK

jAws

heX Key

Fig. 10

sCrewdriVer

mAlleT

heX Key

Keyless

ChuCK

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Ryobi P205 Manuel de l'opérateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Perceuses électriques Ryobi P205