Ryobi RY961 Manuel de l'opérateur télécharger pdf (Page 8)

Page 8

OPERATION

Fig. 5

Fig. 4

WARNING:

If any parts are missing, do not operate tool until the

missing parts are replaced. Failure to do so could result

in possible serious personal injury.

SWITCH

See Figure 4.

Your drill starts and stops by depressing and releasing the

switch trigger.

Model No. RY721 has a two-speed feature in the switch.

Depress the switch trigger halfway for driving screws at low

speed. Depress the switch trigger all the way for normal

drilling. Release the switch trigger to turn drill OFF.

Model Nos. RY961/RY1201 have a variable speed feature

in the switch. The switch delivers higher speed and torque

with increased trigger pressure. Speed is controlled by the

amount of switch trigger depression.

SWITCH LOCK

See Figure 4.

The switch trigger can be locked in the OFF position. This

feature helps reduce the possibility of accidental starting

when not in use. To lock the switch trigger, place the direction

of rotation selector in the center position.

TO INSTALL BATTERY PACK

■ Place the direction of rotation selector in center position.

See Figure 4.

■ Place the battery pack in your drill. Align raised rib on

battery pack with groove in drill's battery port.

See Fig-

ure 5.

■ Make sure the latches on each side of your battery pack

snap in place and that battery pack is secured in drill

before beginning operation.

TO REMOVE BATTERY PACK

■ Place the direction of rotation selector in center position.

See Figure 4.

■ Locate latches on side of battery pack and depress both

sides to release battery pack from your drill.

See Figure 5.

■ Remove battery pack from your drill.

CAUTION:

When placing battery pack in your drill, be sure raised

rib on battery pack aligns with groove in drill's battery

port and latches snap in place properly. Improper

assembly of battery pack can cause damage to internal

components.

DIRECTION OF

ROTATION

SELECTOR

SWITCH

TRIGGER

FORWARD

REVERSE

CENTER POSITION

(LOCK)

DEPRESS

LATCHES TO

RELEASE

BATTERY PACK

LATCHES

BATTERY

PACK

BATTERY

PORT

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY961 Manuel de l'opérateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Perceuses électriques Ryobi RY961