Ryobi RPT4045 Manuel de l'opérateur télécharger pdf (Page 2)

ENGLISH (Original Instructions)

Your Pole hedge trimmer has been engineered and

manufactured to Ryobi's high standard for dependability,

ease of operation, and operator safety. When properly

cared for, it will give you years of rugged, trouble-free

performance.

Thank you for buying a Ryobi product.

GENERAL SAFETY RULES

WARNING

Read and understand all instructions. Failure to

follow the warnings and instructions may result in

electric shock, fire and serious injury.

The term “power tool” in the warnings refer to

your mains-operated corded power tool.

INTENDED USE: This product is designed for use by

one operator, for trimming hedges and bushes, utilising

one or more liner reciprocating cutter blades. It is not

intended for wood cutting.

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

Do not operate power tools in explosive atmospheres,

such as in the presence of ﬂ ammable liquids, gases

or dust. Power tools create sparks which may ignite

the dust or fumes.

Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodiﬁ ed plugs and

matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body

is earthed or grounded.

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric

shock.

If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply, the tripping current of 30mA or less.

PERSONAL SAFETY

Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power

tool while you are tired or under the inﬂ uence of drugs,

alcohol or medication. A moment of inattention while

operating power tools may result in serious personal

injury.

Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

Avoid accidental starting. Ensure the switch is in the

off-position before plugging in. Carrying power tools

with your ﬁ nger on the switch or plugging in power tools

that have the switch on invites accidents.

 Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to

a rotating part of the power tool may result in personal

injury.

Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool

in unexpected situations.

Dress properly. Do not wear loose clothing or jewellery.

Keep your hair, clothing and gloves away from moving

parts. Loose clothes, jewellery or long hair can be caught

in moving parts.

If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of these devices

can reduce dust-related hazards.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

Disconnect the plug from the power source before

making any adjustments, changing accessories, or

storing power tools. Such preventative safety measures

reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool. Power

1 2 3 4 5 6 7 8 9 10

Commentaires sur ces manuels

Pas de commentaire

Ryobi RPT4045 Manuel de l'opérateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Taille-haie électrique Ryobi RPT4045