Ryobi RPT4045 Manuel de l'opérateur Page 6

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 10
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 5
5
ENGLISH (Original Instructions)
SPECIFICATIONS
Voltage :................................................220~240 V, 50 Hz
Power : ................................................................... 400 W
Cutting Capacity : ...................................................18 mm
Blade Length : ......................................................450 mm
Blade Speed : ....................................................1700 /min
Weight : ...................................................................4.1 kg
Sound Pressure Level : .............................L
pA
: 87 dB (A)
Sound Power Level : ................................L
WA
: 97 dB (A)
Vibration : .........................................2.5 m/s
2,
K=1.5 m/s
2
DESCRIPTION
Fig. 1
1. Scabbard
2. Blades
3. Four-Position Pivoting Head
4. Telescopic Pole
5. Lock-Off Button
6. Rear Handle
7. Switch Trigger
8. Cord Retainer
Fig. 2
9. Packaged Tool
10. Cord Protector
11. Cord
12. Threaded Collar
13. Trimmer Head
14. Lock Hole
15. Egg-Shaped Pole
16. Threaded Base
Fig. 4
17. Pivot Button
18. Notches
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing
list are included.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please contact
an authorised service center.
PACKING LIST
Pole Hedge Trimmer
Operator’s Manual
WARNING:
If any parts are damaged or missing, do not
operate this product until the parts are replaced.
Failure to heed this warning could result in
serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
ASSEMBLING THE TOOL
See Figure 2.
Before using the pole hedge trimmer, a one-time assem-
bly is required.
The telescopic pole and trimmer head come
unassembled. Remove from packaging and extend
the telescopic pole to its longest operating position as
shown in Figure 7.
Unscrew the threaded collar from the trimmer head
base and pull back over the cord to the extended
telescopic pole as shown.
Remove and discard both rubber cord protectors from
the telescopic pole.
Insert the telescopic pole into the trimmer head
threaded base until the lock holes click into place. The
tubes are egg-shaped and will only t one way. The
threaded base will spread open during assembly.
NOTE: You may need to slightly rotate the pole from
side to side until it locks into place.
Lower the threaded collar onto the threaded base and
rotate clockwise to secure.
WARNING:
Failure to lock telescopic pole as directed above
could result in serious injury or death.
Vue de la page 5
1 2 3 4 5 6 7 8 9 10

Commentaires sur ces manuels

Pas de commentaire