Ryobi P232 Manuel de l'opérateur télécharger pdf (Page 7)

7 — English

WARNING:

Always remove battery pack from your tool when you

are assembling parts, making adjustments, cleaning,

or when not in use. Removing battery pack will prevent

accidental starting that could cause serious personal

injury.

To remove the battery pack:

 Depress the latches on each side of the battery pack.

 Remove the battery pack from the tool.

WARNING:

Battery tools are always in operating condition.

Therefore, switch should always be locked when not in

use or carrying at your side.

CAUTION:

The metal surface may become hot during use. Avoid

contact with it to avoid possible burn injury.

SWITCH TRIGGER

See Figure 3, page 10.

To turn the tool ON, depress the switch trigger. To turn it

OFF, release the switch trigger.

VARIABLE SPEED

See Figure 3, page 10.

The switch trigger delivers higher speed with increased

trigger pressure and lower speed with decreased trigger

pressure.

NOTE: You might hear a whistling or ringing noise from the

switch during use. Do not be concerned; this is a normal

part of the switch function.

DIRECTION OF ROTATION SELECTOR

(FORWARD/REVERSE/CENTER LOCK)

See Figure 3, page 10.

The direction of bit rotation is reversible and is controlled by

a selector located above the switch trigger. With the impact

driver held in normal operating position, the direction of

rotation selector should be positioned to the left of the switch

trigger for forward rotation. The direction is reversed when

the selector is to the right of the switch trigger.

CAUTION:

To prevent gear damage, always allow coupler to come to

a complete stop before changing the direction of rotation.

To stop, release switch trigger and allow the coupler to come

to a complete stop.

WARNING:

Do not allow familiarity with tools to make you care-

less. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes resulting in possible

serious injury.

WARNING:

Do not use any attachments or accessories not recom-

mended by the manufacturer of this tool. The use of at-

tachments or accessories not recommended can result

in serious personal injury.

APPLICATIONS

You may use this tool for the following purposes:

Driving long deck screws while building a deck

Driving carriage bolts into deck posts

Driving

Tapcon

screws into block walls and concrete

Driving screws into metal studs

This product will accept Ryobi One+ 18 V lithium-ion battery

packs and Ryobi One+ 18 V nickel-cadmium battery packs.

For complete charging instructions, refer to the Operator’s

Manual for the battery packs and chargers for your models.

BATTERY PROTECTION FEATURES

Ryobi lithium-ion batteries are designed with features that

protect the lithium-ion cells and maximize battery life.

If the tool stops during use, release the trigger to reset and

resume operation. If the tool still does not work, the battery

needs to be recharged.

TO INSTALL / REMOVE BATTERY PACK

See Figure 2, page 10.

To install the battery pack:

 Place the direction of rotation selector in the center

position.

 Insert the battery pack into the product as shown.

 Make sure the latches on each side of the battery pack

snap in place and that battery pack is secured in the

product before beginning operation.

OPERATION

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Ryobi P232 Manuel de l'opérateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Clés à chocs Ryobi P232