Ryobi P261 Manuel d'utilisation et d'entretien télécharger pdf (Page 6)

6 — English

OPERATION

TRI-BEAM LED LIGHTS

See Figure 3, page 8.

The tri-beam LED lights around the anvil illuminate when the

switch trigger is depressed.

If the tool is not in use, the time-out feature will cause the

light to start fading and then shut off.

The tri-beam LED lights illuminate only when there is a

charged battery pack in the tool.

INSTALLING AND REMOVING SOCKETS

See Figure 4, page 8.

Use only sockets designed for impact wrenches. Always

select the correct size impact socket for nuts and bolts.

CAUTION:

Using the wrong size socket may damage the nut or

bolt and cause the fastening torque to be inaccurate or

inconsistent.

Remove the battery pack.

Push the socket onto the anvil until the detent pin locks

it into place.

To remove the socket, pull it away from the anvil.

SPEED SELECTOR

See Figure 5, page 8.

The speed of the impact wrench can be changed for various

applications.

LOW (1) Speed (0-1,100 RPM)

MEDIUM (2) Speed (0-1,800 RPM)

HIGH (3) Speed (0-2,900 RPM)

NOTICE:

Never change speeds while the tool is running. Doing

so may result in serious damage to the tool.

OPERATING THE IMPACT WRENCH

See Figures 6 and 7, page 9.

CAUTION:

The metal surface may become hot during use. Avoid

contact with it to avoid possible burn injury.

Proper fastening torque may be determined by the kind of

bolt, the size of the bolt or the material or the workpiece. It

is helpful to perform a test operation to determine the proper

fastening time for the nut or bolt you are using.

Hold the tool pointed straight at the nut or bolt.

Depress the switch and fasten for the proper fastening

time.

Remove the impact wrench from the nut or bolt.

Check the torque with a torque wrench.

NOTICE:

Do not use this tool to install lug nuts on wheels without

a torque limiting device. Doing so may result in galled

or broken lugs.

IMPACT TIME

Many variables exist that will cause the available torque of

the fastener to vary considerably. The optimum impact time

is approximately 6 seconds.

NOTE: Using a universal joint or extension bar may reduce

the fastening force of the impact wrench and require longer

fastening time.

NOTICE:

After the head of a nut or bolt has seated, additional

impacting will increase the chance of shearing bolts,

nuts, sockets or tearing into wood.

ELECTRIC BRAKE

The electric brake will stop the socket rotation after the

operator releases the switch trigger.

NOTE: Maintenance information begins on page 7 after French and

Spanish language sections. Figures (Illustrations) start on page 8.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Ryobi P261 Manuel d'utilisation et d'entretien Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Clés à chocs Ryobi P261