Ryobi AP13AK Spécifications télécharger pdf (Page 11)

MAINTENANCE

LUBRICATION

The recommended lubrication for roller chains

used in medium to low operation is to simply wipe

the chain clean. When there is an excess build up

of dust or wood shavings etc., coat chain with a

light lm of oil but never pour the oil directly on the

chain. Over -oiling tends to hasten the collection

of dust and woodshavings and works them into

members of the chain leading to increased wear

and premature replacement. This applies to the

speed reduction and height adjustment chains as

well as the elevation screws.

The bearings on the cutterhead are factory lubricated

and sealed. They require no further attention.

PERIODIC MAINTENANCE

Build-up of sawdust and other debris can cause

your machine to plane inaccurately. Periodic

cleaning is mandatory for precision planing and

highly recommended.

Close tting parts, such as the lockbars and the

planer cutterhead slots, should be cleaned with

a brush; removing clinging foreign matter. Then

replace all parts in their respective positions

slightly dampened with oil.

Remove resin and other accumulations from feed

rollers and table with a non-amable solvent.

Page 10

1 2 ... 6 7 8 9 10 11 12 13 14

Pas de commentaire

Ryobi AP13AK Spécifications Page 11