Ryobi P610 Manuel de l'opérateur

Naviguer en ligne ou télécharger Manuel de l'opérateur pour Planeurs de puissance Ryobi P610. Ryobi P610 Operator`s manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
OPERATOR’S MANUAL
18 VOLT PLANER
P610
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your planer has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for your purchase.
Vue de la page 0
1 2 3 4 5 6 ... 19 20

Résumé du contenu

Page 1 - OPERATOR’S MANUAL

OPERATOR’S MANUAL18 VOLT PLANER P610SAVE THIS MANUAL FOR FUTURE REFERENCEYour planer has been engineered and manufactured to our high standard for dep

Page 2 - WARRANTY

10OPERATIONNOTE: Batteries will not reach full charge the first time they are charged. Allow several cycles (operation followed by recharging)

Page 3 - GENERAL SAFETY RULES

11OPERATIONCHARGING A HOT BATTERY PACKWhen using the tool continuously, the batteries in the battery pack will become hot. You should let a hot batter

Page 4 - SPECIFIC SAFETY RULES

12641(0.4mm)OPERATIONFig. 6WARNING:Battery tools are always in operating condition. Therefore, switch should always be locked when not in use

Page 5 - IMPORTANT SAFETY INSTRUCTIONS

13OPERATIONWARNING: Always clamp the workpiece securely before making a cut. Work moving during a cut could result in loss of control of the pla

Page 6 - DESIGNATION/EXPLANATION

14OPERATIONCHAMFERINGSee Figure 10.The planer is designed with a chamfering groove in the front shoe to chamfer edges of boards as shown. Before makin

Page 7 - SAVE THESE INSTRUCTIONS

15OPERATIONPLANING EDGESSee Figure 12.Follow the directions in Operating the Planer. Hold the edge guide firmly against the edge of the work surface.A

Page 8 - FEATURES

16MAINTENANCEWARNING:When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product

Page 9 - ASSEMBLY

17MAINTENANCEBLADE WRENCHSCREWSBLADE CLAMPCHANGING BLADESSee Figures 14 - 16.The planer blades are reversible. When one edge becomes dull, the blade c

Page 10 - OPERATION

18MAINTENANCEREPLACING THE BELTSee Figures 17 - 18.When replacing the belt, use recommended replacement belt only (Part No. 570279002).  Remove the

Page 11

19MAINTENANCECLEANING THE CHIP EXHAUST AND EMPTYING THE DUST BAGSee Figure 19.After using the planer for an extended period of time or when planing we

Page 12

2 Introduction ...

Page 13

20ONE WORLD TECHNOLOGIES, INC.1428 Pearman Dairy Road, Anderson, SC 29625Phone 1-800-525-2579www.ryobitools.com• SERVICENow that you have purchased y

Page 14

3GENERAL SAFETY RULESWARNING!Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or

Page 15

4GENERAL SAFETY RULESSPECIFIC SAFETY RULES Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manne

Page 16 - MAINTENANCE

5 An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electri

Page 17

6SYMBOLSSome of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will

Page 18

7SYMBOLSThe following signal words and meanings are intended to explain the levels of risk associated with this product.DANGER:Indicates an imminently

Page 19

8FEATURESFig. 1PRODUCT SPECIFICATIONSMotor ..... 18 Volt DCNo Load Speed ...

Page 20

9UNPACKINGThis product has been shipped completely assembled. Carefully remove the tool and any accessories from the box. Make sure that all items l

Commentaires sur ces manuels

Pas de commentaire