Ryobi P610 Manuel de l'opérateur télécharger pdf (Page 4)

GENERAL SAFETY RULES

SPECIFIC SAFETY RULES

 Use the power tool, accessories and tool bits etc., in

accordance with these instructions and in the manner

intended for the particular type of power tool, taking

into account the working conditions and the work

to be performed. Use of the power tool for operations

different from those intended could result in a hazardous

situation.

BATTERY TOOL USE AND CARE

 Ensure the switch is in the off position before insert-

ing battery pack. Inserting the battery pack into power

tools that have the switch on invites accidents.

 Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another battery pack.

 Use power tools only with specifically designated bat-

tery packs. Use of any other battery packs may create

a risk of injury and fire.

 When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys, nails,

screws, or other small metal objects that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

 Under abusive conditions, liquid may be ejected from

the battery, avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes, ad-

ditionally seek medical help. Liquid ejected from the

battery may cause irritation or burns.

SERVICE

 Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

WARNING!

To reduce the risk of injury, user must read instruction

manual.



When servicing a power tool, use only identical

replacement parts. Follow instructions in the

Maintenance section of this manual.

Use of unauthorized

parts or failure to follow Maintenance instructions may

create a risk of shock or injury.

 Wait for the cutter to stop before setting the tool down.

An exposed cutter may engage the surface leading to

possible loss of control and serious injury.

 Use clamps or another practical way to secure and

support the workpiece to a stable platform.

Holding

the work by hand or against your body leaves it unstable

and may lead to loss of control.

 Hold power tools by insulated gripping surfaces when

performing an operation where the cutting tool may

contact hidden wiring or its own cord. Contact with a

“live” wire will also make exposed metal parts of the tool

“live” and shock the operator.

 Know your power tool. Read operator’s manual

carefully. Learn its applications and limitations, as

well as the specific potential hazards related to this

power tool. Following this rule will reduce the risk of

electric shock, fire, or serious injury.

 Always wear safety glasses with side shields.

Everyday glasses have only impact resistant lenses. They

are NOT safety glasses. Following this rule will reduce

the risk of eye injury.

 Protect your lungs. Wear a face or dust mask if the

operation is dusty. Following this rule will reduce the risk

of serious personal injury.

 Protect your hearing. Wear hearing protection

during extended periods of operation. Following this

rule will reduce the risk of serious personal injury.

 Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in

operating condition. Be aware of possible hazards

when not using your battery tool or when changing

accessories. Following this rule will reduce the risk of

electric shock, fire, or serious personal injury.

 Do not place battery tools or their batteries near fire

or heat. This will reduce the risk of explosion and possibly

injury.

 Never use a battery that has been dropped or received

a sharp blow. A damaged battery is subject to explosion.

Properly dispose of a dropped or damaged battery

immediately.

 Batteries vent hydrogen gas and can explode in the

presence of a source of ignition, such as a pilot light.

To reduce the risk of serious personal injury, never use

any cordless product in the presence of open flame. An

exploded battery can propel debris and chemicals. If

exposed, flush with water immediately.

 Do not charge battery tool in a damp or wet

location. Following this rule will reduce the risk of electric

shock.

 For best results, your battery tool should be charged

in a location where the temperature is more than

50°F but less than 100°F. Do not store outside or in

vehicles.

 Under extreme usage or temperature conditions,

battery leakage may occur. If liquid comes in contact

with your skin, wash immediately with soap and water,

then neutralize with lemon juice or vinegar. If liquid

gets into your eyes, flush them with clean water for

at least 10 minutes, then seek immediate medical

attention. Following this rule will reduce the risk of serious

personal injury.

1 2 3 4 5 6 7 8 9 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Ryobi P610 Manuel de l'opérateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Planeurs de puissance Ryobi P610