Ryobi CSB125 Manuel d'utilisateur télécharger pdf (Page 13)

13 - English

OPERATION

WARNING:

Always cut in a forward direction when pocket cutting.

Cutting in the reverse direction could cause the saw to

climb up on the workpiece and back toward you.

Release the switch and allow the blade to come to a

complete stop.

Lift the saw from the workpiece.

Clear corners out with a hand saw or sabre saw.

LENGTH OF CUT SCALE

See Figure 20, page 18.

The saw is equipped with a length of cut scale on its base.

It is parallel with the saw blade and can be used to measure

the distance into the material the blade cuts.

NOTE: Six inches is the maximum length of cut that you can

measure. Also, it is accurate only when the depth of cut is

set at full maximum depth.

OPTIONAL EDGE GUIDE KIT

See Figure 21, page 19.

Use the optional edge guide kit, part no. 202218001 when

making long or wide rip cuts with the saw.

To assemble edge guide:

Unplug the saw.

Place edge guide through slots in base as shown.

 Adjust edge guide to the width needed.

 Tighten edge guide lock knob securely.

To use edge guide:

Secure the workpiece to prevent movement.

Position the face of the edge guide firmly against the edge

of workpiece.

Guide the saw along the edge to achieve a straight rip

cut.

NOTE: The guiding edge of the workpiece must be

straight for the cut to be straight. Use caution to prevent

the blade from binding in the cut.

OPTIONAL DUST NOZZLE KIT

See Figure 22, page 19.

You may purchase a dust nozzle kit, part no. 200673002,

for use with the saw. The adaptor fits over the dust chute

which is located on the upper blade guard. The nozzle at-

taches to the adaptor.

NOTE: If you use the nozzle, you should always connect it

to a standard vacuum hose.

To attach dust nozzle:

Unplug the saw.

 Lift lower blade guard.

Orient adaptor to fit into the dust chute opening on upper

blade guard.

Secure adaptor with screw provided.

 Align hole in nozzle with raised lip on adaptor and snap

into place when using a vacuum hose.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Ryobi CSB125 Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à moteur Ryobi CSB125