Ryobi CSB134 Manuel d'utilisateur télécharger pdf (Page 4)

4 - English

CIRCULAR SAW SAFETY WARNINGS



Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.



Use the power tool, accessories and tool bits etc. in ac-

cordance with these instructions, taking into account

the working conditions and the work to be performed.

Use of the power tool for operations different from those

intended could result in a hazardous situation.

WARNING:

Never use abrasive cut-off wheels of any kind with this

saw. Use of non wood cutting blades can result in property

damage or serious personal injury.

SERVICE

Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

When servicing a power tool, use only identical

replacement parts. Follow instructions in the

Maintenance section of this manual. Use of unauthorized

parts or failure to follow Maintenance instructions may

create a risk of shock or injury.

DANGER:

Keep hands away from cutting area and the blade.

Keep your second hand on auxiliary handle, or motor

housing. If both hands are holding the saw, they cannot

be cut by the blade.





Do not reach underneath the workpiece. The guard

can not protect you from the blade below the workpiece.





Adjust the cutting depth to the thickness of the

workpiece. Less than a full tooth of the blade teeth

should be visible below the workpiece.





Never hold piece being cut in your hands or across

your leg. Secure the workpiece to a stable platform.

It is important to support the work properly to minimize

body exposure, blade binding, or loss of control.





Hold power tool by insulated gripping surfaces when

performing an operation where the cutting tool may

contact hidden wiring or its own cord. Contact with

a “live” wire will also make exposed metal parts of the

power tool “live” and shock the operator.





When ripping always use a rip fence or straight edge

guide. This improves the accuracy of cut and reduces

the chance of blade binding.





Always use blades with correct size and shape

(diamond versus round) of arbour holes. Blades that

do not match the mounting hardware of the saw will run

eccentrically, causing loss of control.





Never use damaged or incorrect blade washers or

bolt. The blade washers and bolt were specially designed

for your saw, for optimum performance and safety of

operation.

CAUSES AND OPERATOR PREVENTION OF

KICKBACK:

Kickback is a sudden reaction to a pinched, bound, or mis-

aligned saw blade, causing an uncontrolled saw to lift up

and out of the workpiece toward the operator.

When the blade is pinched or bound tightly by the kerf clos-

ing down, the blade stalls and the motor reaction drives the

unit rapidly back toward the operator.

If the blade becomes twisted or misaligned in the cut, the

teeth at the back edge of the blade can dig into the top

surface of the wood causing the blade to climb out of the

kerf and jump back toward the operator.

Kickback is the result of saw misuse and/or incorrect operat-

ing procedures or conditions and can be avoided by taking

proper precautions as given below:

 Maintain a firm grip with both hands on the saw and

position your arms to resist kickback forces. Position

your body to either side of the blade, but not in line

with the blade. Kickback could cause the saw to jump

backwards, but kickback forces can be controlled by the

operator, if proper precautions are taken.

 When blade is binding, or when interrupting a cut

for any reason, release the trigger and hold the saw

motionless in the material until the blade comes to a

complete stop. Never attempt to remove the saw from

the work or pull the saw backward while the blade is

in motion or kickback may occur. Investigate and take

corrective actions to eliminate the cause of blade binding.

GENERAL POWER TOOL SAFETY WARNINGS

1 2 3 4 5 6 7 8 9 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Ryobi CSB134 Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à moteur Ryobi CSB134