Ryobi TS1353DXL Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Scies à moteur Ryobi TS1353DXL. Ryobi TS1353DXL User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 32
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your miter saw has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for buying a Ryobi product.
OPERATOR’S MANUAL
10 in. Compound Miter Saw
TS1353DXL - Double Insulated
Vue de la page 0
1 2 3 4 5 6 ... 31 32

Résumé du contenu

Page 1 - OPERATOR’S MANUAL

SAVE THIS MANUAL FOR FUTURE REFERENCEYour miter saw has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation

Page 2 - INTRODUCTION

10FEATURESFig. 1PRODUCT SPECIFICATIONSBlade Arbor ... 5/8 in.Blade Diameter...

Page 3 - GENERAL SAFETY RULES

11FEATURESFig. 3KNOW YOUR COMPOUND MITER SAWSee Figure 1.Before attempting to use this product, familiarize yourself with all operating features and s

Page 4 - SPECIFIC SAFETY RULES

12FEATURESPOSITIVE STOPS ON MITER TABLEPositive stops have been provided at 0°, 15°, 22-1/2°, 30°, and 45°. The 22-1/2° and 45° positive stops have be

Page 5

13LOOSE PARTS LISTFig. 6WARNING:The use of attachments or accessories not listed might be hazardous and could cause serious personal injury.The follow

Page 6

14ASSEMBLYUNPACKINGThis product requires assembly.n Carefully lift saw from the carton by the carrying handle and the saw base, and place it on a lev

Page 7 - SAVE THESE INSTRUCTIONS

15ASSEMBLYMITER LOCK HANDLESee Figure 8.To install the miter lock handle, place the threaded stud on the end of the miter lock handle into the threade

Page 8 - ELECTRICAL

16ASSEMBLYFig. 12STOP BLOCKSMALLWING SCREWTABLEEXTENSIONFig. 13Fig. 14Fig. 15CLAMPBRACKET SCREWSAW VIEWED FROM BOTTOMCLAMPBRACKETCLAMPBRACKETASSEMBLED

Page 9 - GLOSSARY OF TERMS

17ASSEMBLYTO INSTALL / REPLACE THE BLADESee Figures 16 - 17.WARNING:A 10 in. blade is the maximum blade capacity of the saw. Never use a blade that is

Page 10 - FEATURES

18ASSEMBLYWARNING:Make sure the spindle lock button is not engaged before reconnecting saw into power source. Never engage spindle lock

Page 11

19ASSEMBLYFig. 20VIEW OF MITER TABLE SQUARE WITH FENCE MITERLOCK PLATEMITERLOCK HANDLESLIDING MITER FENCEMITER TABLETHROAT PLATEFRAMING SQUARENOTE: Ma

Page 12 - TOOLS NEEDED

2n Introduction ...

Page 13 - LOOSE PARTS LIST

20ASSEMBLYSQUARING THE BLADE TO THE FENCESee Figures 24 - 26.n Unplug the saw.n Pull the saw arm all the way down and engage the lock pin to hold th

Page 14 - ASSEMBLY

21ASSEMBLYSCALEINDICATORFig. 27MITERSCALEINDICATORSCREWBEVEL SCALESQUARING THE BLADE TO THE MITER TABLESee Figures 28 - 30.n Unplug the saw.n Pull t

Page 15

22OPERATIONWARNING:Do not allow familiarity with tools to make you care-less. Remember that a careless fraction of a second issufficient to i

Page 16

23BEVELSCALEFig. 32INDICATORPOINTINDICATORSCREWSCALEINDICATOROPERATIONn Release the miter lock plate. NOTE: You can quickly locate 0°, 22-1/2° left

Page 17

24OPERATIONn When cutting long pieces of lumber or molding, support the opposite end of the stock with a roller stand or with a work surface level wi

Page 18

25OPERATIONn Place the workpiece flat on the miter table with one edge securely against the fence. If the board is warped, place the convex side agai

Page 19

26OPERATION4 PITCH OF SIDENUMBER OF SIDES0°6M- 45.00°B- 0.00°5°10°15°20°25°30°35°40°45°50°55°60°65°70°75°80°85°90°578 910M- 36.00°B- 0.00°M- 3

Page 20

27OPERATIONWhen setting the bevel and miter angles for compound miters, remember that the settings are interdependent; changing one angle changes th

Page 21

28OPERATIONWRONGWARNING: To avoid a kickback and to avoid serious personal injury, never position the concave edge of bowed or warped material against

Page 22 - OPERATION

29ADJUSTMENTSWARNING:Before performing any adjustment, make sure the tool is unplugged from the power supply. Failure to heed this warning could resul

Page 23

3GENERAL SAFETY RULESWARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fir

Page 24

30MAINTENANCEWARNING:When servicing, use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause p

Page 25

31Fig. 45ALKALINECELLALKALINECELLALKALINECELLNEGATIVE (–)LASER GUIDESUPPORTBATTERIESCHANGING THE BATTERIESSee Figures 44 - 45.n Unplug the saw.n Remo

Page 26

RYOBI TECHNOLOGIES, INC.1428 Pearman Dairy Road, Anderson, SC 29625Post Office Box 1207, Anderson, SC 29622-1207Phone 1-800-525-2579www.ryobitools.com

Page 27

4GENERAL SAFETY RULESn NEVER USE IN AN EXPLOSIVE ATMOSPHERE.Normal sparking of the motor could ignite fumes.n INSPECT TOOL CORDS PERIODICALL

Page 28

5n NEVER hand hold a workpiece that is too small to be clamped. Keep hands clear of the cutting area.n NEVER reach behind, under, or within three in

Page 29 - ADJUSTMENTS

6SYMBOLSSome of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-tion of these symbols wil

Page 30 - MAINTENANCE

7SYMBOLSSERVICEServicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we su

Page 31

8EXTENSION CORDSWhen using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to h

Page 32

9GLOSSARY OF TERMSNon-Through CutsAny cutting operation where the blade does not extend completely through the thickness of the workpiece.Push

Commentaires sur ces manuels

Pas de commentaire