Ryobi TSS100L1 Manuel d'utilisateur télécharger pdf (Page 17)

100

17 — English

ASSEMBLY

WARNING:

Make sure the spindle lock button is not engaged

before reconnecting saw into power source. Never

engage spindle lock button when blade is rotating.

DANGER:

Laser radiation. Avoid direct eye contact with light source.

WARNING:

Use of controls or adjustments or performance of

procedures other than those specified herein may result

in hazardous radiation exposure.

ALIGNING THE LASER GUIDE LINE

See Figure 16.

Lock the switch by installing a padlock (not included) through

the hole in the switch trigger and closing the shackle.

Draw a line on the workpiece. When the laser guide switch

is turned on it will generate a red line on the work surface.

This line will let you see your mark and the laser guide line

at the same time, and will assist you in lining up the mark

for more accurate cutting of the workpiece.

Align the laser line and the mark with the blade at the

uppermost position. Once both lines are in alignment, do

not move the workpiece.

Remove the padlock then plug the saw into the power

source. Make several practice cuts on different styles and

thickness of material. Repeat the steps above as necessary.

Follow the directions below for using the laser guide:

Removing Your Mark:

Position the laser line near the left edge of your mark on the

work surface in order to remove the mark.

To Cut Your Mark:

Position the laser line near or over your mark on the work

surface in order to cut the mark.

To Leave Your Mark:

Position the laser line near the right edge of your mark on

the work surface in order to leave the mark.

After you have become familiar with using the laser guide,

you will be able to remove, cut, or leave your mark on the

work surface. Practice will teach you the correct position for

aligning the laser line with your mark.

Fig. 16

RED

LINE

LASER

GUIDE

SWITCH

LASER RADIATION EMITTED

FROM THIS APERTURE

LOCK TRIGGER PRIOR

TO ADJUSTING LASER

AVOID EXPOSURE:

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 99 100

Commentaires sur ces manuels

Pas de commentaire

Ryobi TSS100L1 Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à moteur Ryobi TSS100L1