Ryobi TSS100L1 Manuel d'utilisateur télécharger pdf (Page 19)

100

19 — English

ASSEMBLY

SQUARING THE BLADE TO THE FENCE

See Figures 18 - 21.

 Unplug the saw.

 Pull the saw arm all the way down and engage the lock

pin to hold the saw arm in transport position.

 Loosen the miter lock handle approximately one-half turn.

 Rotate the miter table until the pointer on the control arm

is positioned at 0°.

 Securely tighten the miter lock handle.

 Lay a framing square flat on the miter table. Place one

leg of the square against the fence. Slide the other leg

of the square against the flat part of saw blade.

NOTE: Make sure that the square contacts the flat part

of the saw blade, not the blade teeth.

 The edge of the square and the saw blade should be

parallel as shown in figure 19.

 If the front or back edge of the saw blade angles away

from the square as shown in figures 20 - 21, adjustments

are needed.

 Loosen the socket head screws that secure the miter

fence to the miter table.

 Rotate the miter fence left or right until the saw blade is

parallel with the square.

 Retighten the screws securely and recheck the blade-to-

fence alignment.

The saw has two scale indicators, one on the bevel scale

and one on the miter scale. After squaring adjustments have

been made, it may be necessary to loosen the indicators

screws and reset them to zero.

MITER

LOCK HANDLE

Fig. 19

MITER

TABLE

VIEW OF BLADE SQUARE WITH FENCE

BLADE

FRAMING

SQUARE

VIEW OF BLADE NOT SQUARE WITH

FENCE, ADJUSTMENTS ARE REQUIRED

Fig. 20

Fig. 18

FENCE

SOCKET HEAD

SCREW(S)

SOCKET HEAD

SCREW(S)

Fig. 21

VIEW OF BLADE NOT SQUARE WITH

FENCE, ADJUSTMENTS ARE REQUIRED

MITER

FENCE

MITER

TABLE

BLADE

FRAMING

SQUARE

MITER

FENCE

MITER

TABLE

BLADE

FRAMING

SQUARE

MITER

FENCE

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 99 100

Commentaires sur ces manuels

Pas de commentaire

Ryobi TSS100L1 Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à moteur Ryobi TSS100L1