Ryobi HP24 Manuel de l'opérateur télécharger pdf (Page 3)

Page 3

Tool Use and Care

■ Use clamps or other practical way to secure and

support the workpiece to a stable platform. Holding

the work by hand or against your body is unstable and

may lead to loss of control.

■ Do not force tool. Use the correct tool for your appli-

cation. The correct tool will do the job better and safer

at the rate for which it is designed.

■ Do not use tool if switch does not turn it on or off. A

tool that cannot be controlled with the switch is danger-

ous and must be repaired.

■ Disconnect battery pack from tool or place the switch

in the locked or off position before making any ad-

justments, changing accessories, or storing the tool.

Such preventive safety measures reduce risk of starting

the tool accidentally.

■ Store idle tools out of reach of children and other

untrained persons. Tools are dangerous in the hands

of untrained users.

■ When battery pack is not in use, keep it away from

other metal objects like: paper clips, coins, keys,

nails, screws, or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

sparks, burns, or a fire.

■ Maintain tools with care. Keep cutting tools sharp

and clean. Properly maintained tools, with sharp cutting

edges are less likely to bind and are easier to control.

■ Check for misalignment or binding of moving parts,

breakage of parts, and any other condition that may

affect the tool's operation. If damaged, have the tool

serviced before using. Many accidents are caused by

poorly maintained tools.

■ Use only accessories that are recommended by the

manufacturer for your model. Accessories that may

be suitable for one tool, may create a risk of injury when

used on another tool.

Service

■ Tool service must be performed only by qualified

repair personnel. Service or maintenance performed

by unqualified personnel could result in a risk of injury.

■ When servicing a tool, use only identical replace-

ment parts. Follow instructions in the Maintenance

section of this manual. Use of unauthorized parts or

failure to follow Maintenance Instructions may create a

risk of shock or injury.

Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden

wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.

GENERAL SAFETY RULES

SPECIFIC SAFETY RULES

■ Do not charge battery tool in a damp or wet location.

Following this rule will reduce the risk of electric shock,

fire, or serious personal injury.

■ For best results, your battery tool should be charged

in a location where the temperature is more than

50°F but less than 100°F. Do not store outside or in

vehicles.

■ Under extreme usage or temperature conditions,

battery leakage may occur. If liquid comes in contact

with your skin, wash immediately with soap and

water, then neutralize with lemon juice or vinegar. If

liquid gets into your eyes, flush them with clean

water for at least 10 minutes, then seek immediate

medical attention. Following this rule will reduce the

risk of serious personal injury.

Additional Rules For Safe Operation

■ Know your power tool. Read operator's manual

carefully. Learn its applications and limitations, as

well as the specific potential hazards related to this

tool. Following this rule will reduce the risk of electric

shock, fire, or serious injury.

Important Rules for Battery Tools

■ Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in

operating condition. Be aware of possible hazards

when not using your battery tool or when changing

accessories. Following this rule will reduce the risk of

electric shock, fire, or serious personal injury.

■ Do not place battery tools or their batteries near fire

or heat. This will reduce the risk of explosion and

possible injury.

WARNING:

Batteries vent hydrogen gas and can explode in the

presence of a source of ignition, such as a pilot light. To

reduce the risk of serious injury, never use any cordless

product in the presence of open flame. An exploded battery

can propel debris and chemicals. If exposed, flush with water

immediately.

1 2 3 4 5 6 7 8 9 10

Commentaires sur ces manuels

Pas de commentaire

Ryobi HP24 Manuel de l'opérateur Page 3

Commentaires sur ces manuels