Ryobi R10633 Manuel de l'opérateur

Naviguer en ligne ou télécharger Manuel de l'opérateur pour Outils électriques Ryobi R10633. Ryobi R10633 Operator`s manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Your new cordless circular saw has been engineered and manufactured to Ryobi’s high standard for dependability, ease of
operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand operator's manual.
Thank you for buying a Ryobi cordless circular saw.
OPERATOR'S MANUAL
5-1/2 in. (140 mm), 18 VOLT
CORDLESS CIRCULAR SAW
MODEL NO. R10633
SAVE THIS MANUAL FOR FUTURE REFERENCE
SPECIFICATIONS:
Blade Diameter 5-1/2 in. (140 mm)
Blade Arbor 3/8 in. (10 mm)
Cutting Depth at 0° 1-9/16 in. (40 mm)
Cutting Depth at 45° 1-1/8 in. (29 mm)
No Load Speed 4,200 RPM
Motor 18 Volt DC
Charge Rate 1 Hour
Charger Rating 120 Volts, 60 Hz, AC
Vue de la page 0
1 2 3 4 5 6 ... 19 20

Résumé du contenu

Page 1 - MODEL NO. R10633

Your new cordless circular saw has been engineered and manufactured to Ryobi’s high standard for dependability, ease ofoperation, and operator safety.

Page 2 - UNPACKING

Page 10WARNING:Always remove battery pack from your saw when youare assembling parts, making adjustments, assemblingor removing blades, cleaning, or w

Page 3 - GENERAL SAFETY RULES

Page 1145455050303022221123045Fig. 6BLADESCREWBLADEWRENCHSPINDLELOCK BUTTON Fit saw blade inside lower blade guard and onto spindle.NOTE: The saw tee

Page 4 - SPECIFIC SAFETY RULES

Page 12KICKBACKSee Figure 8.The best guard against kickback is to avoid dangerouspractices.Kickback occurs when the blade stalls rapidly and the saw i

Page 5 - CAUTION:

Page 13 When making a cut use steady, even pressure. Neverforce cuts. Do not cut warped or wet lumber. Always hold your saw firmly with both hands

Page 6

Page 14TO HELP MAINTAIN CONTROL: Always support your workpiece near the cut. Support your workpiece so the cut will be on your left. Clamp your wor

Page 7 - SAVE THESE INSTRUCTIONS

Page 15TO CROSS CUT OR RIP CUTWhen making a cross cut or rip cut, align your line of cutwith the outer blade guide notch on the saw base asshown in fi

Page 8 - FEATURES

Page 16TO BEVEL CUTThe angle of cut of your saw may be adjusted to any desiredsetting between zero and 50°. NOTE: When making cuts at50°, blade should

Page 9

Page 1712450015223045504545505030302222POSITIVE 0° BEVEL STOPSee Figure 21.Your saw has a positive 0° bevel stop, that has been factoryadjusted to ass

Page 10 - TO ASSEMBLE OR REMOVE BLADE

Page 184545505030302222TO RIP CUTOPTIONAL RIP GUIDE (EDGE GUIDE)See Figure 23.Use a guide when making long or wide rip cuts with your saw.An optional

Page 11 - OPERATION

Page 19WARNING:When servicing, use only identical replacement parts.Use of any other part may create a hazard or causeproduct damage.WARNING:Do not at

Page 12 - KICKBACK

Page 2Look for this symbol to point out important safety precautions. It means attention!!!Your safety is involved.The following recommended accessori

Page 13 - STARTING A CUT

983000-192 7-03RYOBI TECHNOLOGIES, INC.1428 Pearman Dairy Road Anderson, SC 29622Post Office Box 1207 Anderson, SC 29622-1207Phone 1-800-525-

Page 14

Page 3GENERAL SAFETY RULESWARNING:Read and follow all instructions. Failure to follow allinstructions listed below, may result in electric shock, fire

Page 15

Page 4SPECIFIC SAFETY RULESAdditional Rules For Safe Operation Know your power tool. Read operator’s manual care-fully. Learn its applications and li

Page 16

Page 5SPECIFIC SAFETY RULESAdditional Specific Safety Rules Continued Never use damaged or incorrect blade washers orbolts. The blade washers and bol

Page 17 - See Figure 22

Page 6 To reduce the risk of damage to charger body andcord, pull by charger plug rather than cord whendisconnecting charger. Following this rule wi

Page 18

Page 7The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, andthe explanations with them, deserve your

Page 19 - RECYCLING

Page 8KNOW YOUR CORDLESS CIRCULAR SAWSee Figure 1.Before attempting to use any tool, familiarize yourself withall operating features and safety requir

Page 20

Page 9LED FUNCTION OF CHARGERSee Figure 2.LED WILL BE LIGHTED TO INDICATE STATUS OFCHARGER AND BATTERY PACK: Red LED lighted = Fast Charging Mode

Commentaires sur ces manuels

Pas de commentaire