Ryobi RTS31 Manuel de l'opérateur télécharger pdf (Page 11)

FEATURES

OPERATING COMPONENTS

The upper portion of the blade projects up through the table

and is surrounded by an insert called the throat plate. The

height of the blade is set with a handwheel on the front of the

cabinet. Detailed instructions are provided in the Operation

section of this manual for the basic cuts: cross cuts, miter

cuts, bevel cuts, and compound cuts.

The sliding miter table assembly is used for cross cutting

operations. The miter fence is easily adjusted to cut wood

at an angle by loosening the adjusting clamp, setting the

fence to the miter scale, and retightening the clamp. With

the miter fence removed, the miter table offers additional

support for other operations such as ripping.

The rip fence is used to position work for lengthwise cuts.

A scale on the front rail shows the distance between the rip

fence and the blade.

It is very important to use the blade guard assembly for

all through-sawing operations. The blade guard assembly

includes: riving knife, anti-kickback pawls, and plastic blade

guard.

SWITCH ASSEMBLY

See Figure 3.

This saw is equipped with a switch assembly that has a

built-in locking feature. This feature is intended to prevent

unauthorized and possible hazardous use by children and

others.

TO TURN YOUR SAW ON:

 With the switch key inserted into the switch, lift the switch

to turn ON ( l ).

TO TURN YOUR SAW OFF:

 Press the switch down to turn OFF ( O ).

TO LOCK YOUR SAW:

 Press the switch down.

 Remove the switch key from the switch and store in a

safe, secure location.

Fig. 3

SWITCH KEY

SWITCH IN LOCKED POSITION

SWITCH

OFF

SWITCH

WARNING:

Always remove the switch key when the tool is not in

use and keep it in a safe place. In the event of a power

failure, turn the switch OFF ( O ) and remove the key.

This action will prevent the tool from accidentally starting

when power returns.

WARNING:

ALWAYS make sure your workpiece is not in contact with

the blade before operating the switch to start the tool.

Failure to heed this warning may cause the workpiece to

be kicked back toward the operator and result in serious

personal injury.

WARNING:

To reduce the risk of accidental starting, ALWAYS make

sure the switch is in the OFF ( O ) position before plug-

ging tool into the power source.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Ryobi RTS31 Manuel de l'opérateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi RTS31