Ryobi RTS31 Manuel de l'opérateur télécharger pdf (Page 32)

OPERATION

MAKING CUTS

The blade provided with the saw is a high-quality combina-

tion blade suitable for ripping and cross cut operations.

WARNING:

Do not use blades rated less than the speed of this tool.

Failure to heed this warning could result in personal

injury.

Use the miter fence when making cross, miter, bevel, and

compound miter cuts. To secure the angle, lock the miter

fence in place by twisting the lock knob clockwise. Always

tighten the lock knob securely in place before use.

NOTE: It is recommended that you place the piece to be

saved on the left side of the blade and that you make a test

cut on scrap wood first.

MAKING A CROSS CUT

See Figures 42 - 43.

WARNING:

Using the rip fence as a cutoff gauge when cross cutting

will result in kickback which can cause serious personal

injury.

WARNING:

Make sure the blade guard assembly is installed and

working properly to avoid possible serious injury.

 Remove the rip fence.

 Set the blade to the correct depth for the workpiece.

 Set the miter fence to 0° and tighten the lock knob.

 Make sure the wood is clear of the blade before turning

on the saw.

 To turn the saw on, lift the switch button.

 To turn saw off, press the switch button down.

NOTE: To prevent unauthorized use, remove the switch

key as shown in figure 43.

 Let the blade build up to full speed before moving the

workpiece into the blade.

 Hold the workpiece firmly with both hands on the miter

fence and feed the workpiece into the blade.

 When the cut is made, turn the saw off. Wait for the

blade to come to a complete stop before removing the

workpiece.

Fig. 43

SWITCH KEY

SWITCH IN LOCKED POSITION

SWITCH

OFF

SWITCH

CROSS CUT

PLACE LEFT HAND ON

WORKPIECE AND

MITER FENCE HERE

Fig. 42

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Ryobi RTS31 Manuel de l'opérateur Page 32

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi RTS31