Ryobi C2600 Manuel de l'opérateur télécharger pdf (Page 12)

Page 12

ADJUSTMENTS

Fig. 9

QUICK LOCK-RELEASE LEVER

See Figures 9 and 10.

The quick lock-release lever engages the vise clamp to be

used along with the fence assembly to provide a vise for

securing the workpiece to be cut. It also allows you to open

and close the vise quickly without repetitive turning of the

vise crank handle.

USING THE QUICK LOCK-RELEASE LEVER

AND VISE CLAMP

TO LOOSEN

See Figure 9.

■ Unplug your cut-off machine.

WARNING:

Failure to unplug cut-off machine could result in accidental

starting causing possible serious personal injury.

■ Release tension on the vise clamp by rotating the vise

crank handle 1/2 to 1 turn counterclockwise.

■ Lift up the quick lock-release lever as shown in figure 9

and pull back on vise crank handle to slide open the vise.

TO TIGHTEN

See Figure 10.

■ Unplug your cut-off machine.

WARNING:

Failure to unplug cut-off machine could result in accidental

starting causing possible serious personal injury.

■ Push the vise crank handle forward to slide the vise clamp

against the workpiece.

■ Rotate the quick lock-release lever forward and push

down as shown in figure 10 to engage its threads with

the vise screw.

■ Rotate the vise crank handle clockwise to tighten the vise

clamp against the workpiece.

Fig. 10

QUICK LOCK-RELEASE LEVER

WITH THREADS NOT ENGAGED

VISE

CLAMP

VISE CRANK

HANDLE

VISE

SCREW

VISE

CLAMP

VISE CRANK

HANDLE

QUICK LOCK-RELEASE LEVER

WITH THREADS ENGAGED

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Commentaires sur ces manuels

Pas de commentaire

Ryobi C2600 Manuel de l'opérateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Coupe-circuit universel Ryobi C2600