Page 14
15
45
0
MATERIAL
TO BE CUT
POWER SUPPLY
Before operating your cut-off machine, check your power
supply and make sure it meets the requirements listed on
the tool’s data plate. A substantial voltage drop will cause a
loss of power and machine overheating.
Common causes of power loss and machine overheating
are insufficient extension cord size and multiple tools
operating from the same power source.
SWITCH
To turn your cut-off machine ON, depress the switch trigger
located in the handle portion of the machine arm.
To turn it OFF, release the switch trigger.
LOCK-ON BUTTON
To engage the lock-on feature, depress the switch trigger,
push in and hold the lock-on button located on the side of the
handle, then release switch trigger. Release lock-on button
and your machine will continue running.
To release the lock-on feature, depress the switch trigger
and release.
If you have the lock-on feature engaged during use and your
machine becomes disconnected from power supply, or in the
event of a power failure, disengage the lock-on feature
immediately.
CUTTING WITH YOUR CUT-OFF MACHINE
See Figures 12 and 13.
WARNING:
Do not attempt to cut wood or masonry with this cut-off
machine. Never cut magnesium or magnesium alloy with
this machine. Failure to comply could result in serious
personal injury.
■ To prevent machine movement or tipping during cutting
procedure, secure cut-off machine in place to a
workbench or work surface that is also secure.
WARNING:
Always use the vise on the cut-off machine to prevent
accidents that could result in possible serious personal
injury.
“C” CLAMP
AREA
OPERATION
Fig. 12
Fig. 13
MACHINE
BASE
MACHINE ARM
(HANDLE)
SWITCH
TRIGGER
MATERIAL
TO BE CUT
EXTENSION
BLOCK
ADJUSTABLE
FLIP FENCE
VISE
CLAMP
0
15
30
45
LOCK-ON
BUTTON
WARNING:
Large, circular, or irregularly shaped material may require
additional means of clamping to be secured in place
adequately for cutting. Use “C” clamps that can be
mounted along the left and front side of the machine base.
Also use blocks to hold material securely. Failure to
comply could result in serious personal injury.
WARNING:
Never stand or have any part of your body in line with the
path of the wheel. Doing so may cause an accident
resulting in possible serious personal injury.
WARNING:
To avoid accidental start up of your cut-off machine,
always make sure switch is off and “lock-on” feature is
disengaged before connecting to power source. Failure
to heed this warning could result in serious personal injury.
(20 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels