Ryobi C2600 Manuel de l'opérateur télécharger pdf (Page 4)

Page 4

RULES FOR SAFE OPERATION

Safe operation of this power tool requires that you read and

understand this operator's manual and all labels affixed to

the tool. Safety is a combination of common sense, staying

alert, and knowing how your cut-off machine works.

READ ALL INSTRUCTIONS

■ KNOW YOUR POWER TOOL. Read the operator's

manual carefully. Learn the cut-off machine's applications

and limitations as well as the specific potential hazards

related to this tool.

■ GUARD AGAINST ELECTRICAL SHOCK BY

PREVENTING BODY CONTACT WITH GROUNDED

SURFACES. For example; pipes, radiators, ranges,

refrigerator enclosures.

■ KEEP GUARDS IN PLACE and in good working order.

■ REMOVE ADJUSTING KEYS AND WRENCHES. Get

in the habit of checking to see that hex keys and adjusting

wrenches are removed from tool before turning it on.

■ KEEP THE WORK AREA CLEAN. Cluttered work areas

and work benches invite accidents. DO NOT leave tools

or pieces of work on the machine while it is in operation.

■ DO NOT USE IN DANGEROUS ENVIRONMENTS. Do

not use power tools near gasoline or other flammable

liquids, in damp or wet locations, or expose them to rain.

Keep the work area well lit.

■ KEEP CHILDREN AND VISITORS AWAY. All visitors

should wear safety glasses and be kept a safe distance

from work area. Do not let visitors contact tool or

extension cord while operating.

■ MAKE WORKSHOP CHILD-PROOF with padlocks and

master switches, or by removing starter keys.

■ DO NOT FORCE THE TOOL. It will do the job better and

safer at the rate for which it was designed.

■ USE THE RIGHT TOOL. Do not force the tool or

attachment to do a job it was not designed for. Don't use

it for a purpose not intended.

■ USE THE PROPER EXTENSION CORD. Make sure your

extension cord is in good condition. When using an

extension cord, be sure to use one heavy enough to carry

the current your product will draw. An undersized cord

will cause a drop in line voltage resulting in loss of power

and overheating. A wire gage size (A.W.G.) of at least 14

is recommended for an extension cord 25 feet or less in

length. If in doubt, use the next heavier gage. The smaller

the gage number, the heavier the cord.

■ INSPECT EXTENSION CORDS PERIODICALLY and

replace if damaged.

■ DRESS PROPERLY. Do not wear loose clothing, gloves,

neckties, rings, bracelets, or other jewelry. They can get

caught and draw you into moving parts. Rubber gloves

and nonslip footwear are recommended when working

outdoors. Also wear protective hair covering to contain

long hair.

■ ALWAYS WEAR SAFETY GLASSES WITH SIDE

SHIELDS. Everyday eyeglasses have only impact-

resistant lenses; they are NOT safety glasses.

■ PROTECT YOUR LUNGS. Wear a face or dust mask if

the cutting operation is dusty.

■ PROTECT YOUR HEARING. Wear hearing protection

during extended periods of operation.

■ SECURE WORK. Use clamps or a vise to hold work when

practical. It's safer than using your hand and it frees both

hands to operate tool.

■ DO NOT ABUSE CORD. Never yank cord to disconnect

it from receptacle. Keep cord from heat, oil, and sharp

edges.

■ DO NOT OVERREACH. Keep proper footing and balance

at all times.

■ MAINTAIN TOOLS WITH CARE. Keep tools sharp and

clean for better and safer performance. Follow

instructions for lubricating and changing accessories.

■ DISCONNECT ALL TOOLS. When not in use, before

servicing, or when changing attachments, wheels, bits,

cutters, etc., all tools should be disconnected.

■ AVOID ACCIDENTAL STARTING. Be sure switch is off

when plugging in.

■ USE RECOMMENDED ACCESSORIES. The use of

improper accessories may cause risk of injury.

■ NEVER STAND ON TOOL. Serious injury could occur if

the tool is tipped or if the wheel is unintentionally

contacted.

■ CHECK DAMAGED PARTS. Before further use of the

tool, a guard or other part that is damaged should be

carefully checked to determine that it will operate properly

and perform its intended function. Check for alignment of

moving parts, binding of moving parts, breakage of parts,

mounting and any other conditions that may affect its

operation. A guard or other part that is damaged must be

properly repaired or replaced by an authorized service

center to avoid risk of personal injury.

■ NEVER LEAVE TOOL RUNNING UNATTENDED. TURN

THE POWER OFF. Do not leave tool until it comes to a

complete stop.

■ USE ONLY CORRECT WHEELS. Do not use wheels

with incorrect size holes. Never use wheel washers or

wheel screws that are defective or incorrect. The

maximum wheel capacity of your cut-off machine is 14 in.

(356 mm).

■ DO NOT REMOVE THE MACHINE'S WHEEL GUARDS.

Never operate the machine with any guard or cover

removed. Make sure all guards are operating properly

before each use.

■ KEEP HANDS AWAY FROM CUTTING AREA. Keep

hands away from wheel. Do not reach underneath work

or around or under the wheel while the wheel is rotating.

Do not attempt to remove cut material while wheel is

moving.

1 2 3 4 5 6 7 8 9 ... 18 19

Commentaires sur ces manuels

Pas de commentaire

Ryobi C2600 Manuel de l'opérateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Coupe-circuit universel Ryobi C2600