Ryobi A25RT01 Manuel d'utilisateur télécharger pdf (Page 14)

Inch

FENCE LOCK KNOBS

CARRIAGE BOLTS

FENCE LOCK KNOB

WASHER

SLOT

Fig. 13

Inch

FEED

DIRECTION

ASSEMBLY

Fig. 12

INSERT

PLATE

STRAIGHT

EDGE

ADJUSTING

SCREWS

HEX KEY

CARRIAGE BOLT

WASHER

FENCE

ASSEMBLY

MAKING INSERT PLATE LEVEL

See Figure 12.

 Unplug the router table and/or the router.

 Check to see if the insert plate mounted assembly is level

with a straight edge or level.

 Using the supplied hex key, tighten or loosen the adjust-

ing screws depending on how the insert plate needs to be

adjusted in order to make the insert plate level.

 Tighten insert plate screws with a screwdriver.

ATTACHING THE FENCE ASSEMBLY

See Figure 13.

 Unplug the router table and/or the router.

 Place the router table right side up with the back edge

closest to you.

 Slide the carriage bolt washers onto the carriage bolts.

 Slide carriage bolts through the slot in the router table

and through the slots in the fence assembly.

 Slide the fence lock knob washer over the carriage

bolts.

 Install the fence lock knobs over the carriage bolts.

 Tighten the fence lock knobs.

INSERTING AND REMOVING THROAT

PLATES

See Figure 14.

The throat plate provides a stable surface around the cutter

and prevents objects from falling through the throat plate

and damaging the spindle.

WARNING:

Make sure throat plates snap securely into place. Do

not use if snaps are damaged or throat plates do not

snap in securely. Failure to do so could result in serious

personal injury.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Ryobi A25RT01 Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs Ryobi A25RT01