Ryobi A25RT01 Manuel d'utilisateur télécharger pdf (Page 16)

inch

FEED

DIRECTION

inch

VACUUM HOSE

VACUUM PORT

Inch

FEED

DIRECTION

Inch

FEED

DIRECTION

HEX NUT

WORK TABLE

FLAT

WASHER

LOCK

WASHER

ASSEMBLY

CLAMP

WORK TABLE

ATTACHING THE VACUUM HOSE

See Figure 17.

The vacuum port molded into the fence will accept either a

1-1/4 in. or 2-1/2 in. vacuum attachment.

CLAMPING THE ROUTER TABLE TO A WORK

BENCH

See Figures 18.

 Unplug the router table and/or the router.

 Place the router table right side up on a sturdy work

surface; e.g., leg stand, workbench, counter top.

 Using a clamp, insert the top front of clamp through the

opening in the router table leg.

 Tighten clamp securely.

MOUNTING THE ROUTER TABLE TO A

WORK BENCH

See Figure 19.

 Unplug the router table and/or the router.

 Place the router table right side up on a sturdy work

surface; e.g., leg stand, workbench, counter top.

 Mark the holes with a pencil.

 Remove the router table.

 Drill four holes through the work surface.

 Place the router table back on the work surface, align-

ing the holes in the table legs with the holes in the work

surface.

NOTE: Position the router table surface at approximately

hip height.

 Insert four bolts (not included, 1/4-20 recommended) and

tighten securely with flat washers, lock washers, and hex

nuts (not included).

Fig. 19

Fig. 18

BOLTS

Fig. 17

1 2 ... 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Ryobi A25RT01 Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs Ryobi A25RT01