Ryobi RE180PL1 Manuel d'utilisateur télécharger pdf (Page 13)

EACH 90

° ROTATION OF DEPTH

STOP KNOB EQUALS 1/64 in.

(0.4 mm) CHANGE IN DEPTH OF CUT

TO ADJUST DEPTH OF CUT USING OPTIONAL

DEPTH CONTROL KNOB

See Figure 9.

■ UNPLUG YOUR ROUTER.

WARNING:

Failure to unplug your router could result in acciden-

tal starting casuing serious injury.

■ Loosen lock knob and raise stop bar.

■ Unlock plunge lock lever and raise cutter to its up-

permost position.

■ Plunge router until cutter reaches the approximate

desired depth of cut.

■ Lock plunge lock lever, temporarily locking cutter at

desired depth of cut.

■ Turn depth control knob clockwise until hex nut seats

against stop flange. Do not overtighten.

■ Unlock plunge lock lever. Always unlock plunge

lock lever before setting depth of cut with depth

control knob.

■ Turn depth control knob until cuter reaches desired

depth of cut.

■ Lock plunge lever. Always lock cutter in place

before routing.

■ Loosen lock knob and adjust stop bar until it touches

depth stop.

■ Tighten lock knob securely.

DEPTH STOP

See Figures 10 and 11.

The depth stop is located on the base of your router and

makes it possible to make deep or heavy cuts in

successive passes by use of the Accu-Stop™ Micro-

Adjustable Depth Stop System. Alignment marks make

depth of cut changes quick and easy.

A preset cutting depth is achieved by plunging router

until stop bar comes in contact with depth stop. The

micro-adjusting feature provides alignment marks at

each 90° rotation of the depth stop knob. Each 90°

rotation of the knob changes depth of cut setting 1/64 in.

(0.4 mm).

See Figure 10.

A complete rotation (360°) of the depth stop knob changes

the depth of cut setting 1/16 in. (1.6 mm).

See Figure 11.

The Accu-Stop™ Micro-Adjustable Depth Stop System

provides for depth of cut changes to be made from 0 to

1/2 in. (12.7 mm) from the initial setting of the stop bar.

This initial setting of the stop bar can be "zero" depth of

cut, or it can be any depth of cut setting that you choose

as a starting point for a particular job to be performed.

EACH COMPLETE ROTATION

360° OF DEPTH STOP KNOB

EQUALS 1/16 in. (1.6 mm)

CHANGE IN DEPTH OF CUT

ADJUSTMENTS

DEPTH STOP

KNOB

ACCU-STOP

MICRO-ADJUSTABLE

DEPTH STOP

STOP

BAR

LOCK

KNOB

Fig. 10

STOP

BAR

LOCK

KNOB

Fig. 11

ZERO RESET INDICATOR

WITH RED LINE

SCALE

Fig. 9

OPTIONAL DEPTH

CONTROL KNOB

DEPTH

ADJUSTMENT

ROD

COMPRESSION

SPRING

HEX NUT

PLUNGE

LOCK

LEVER

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi RE180PL1 Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs Ryobi RE180PL1