Ryobi RE180PL1 Manuel d'utilisateur télécharger pdf (Page 15)

SWITCH

See Figure 13.

To turn the router ON, toggle the switch to the I position.

To turn the router OFF, toggle the switch to the O

position.

CAUTION:

We suggest that you practice with your router before

installing a cutter and making cuts in wood.

ROUTING

See Figure 14.

For ease of operation and maintaining proper control,

your router has two handles, one on each side of the

router base. When using your router hold it firmly with

both hands.

Before starting the router, unplug it and make sure the

cutter is securely tightened in collet nut and that depth of

cut is properly set.

Plug router into power supply, turn it on, and let motor

build to its full speed, then gradually plunge or feed cutter

into workpiece. Do not let the cutter contact workpiece

before turning on router and allowing it to develop full

speed.

Remain alert and watch what you are doing. Do not

operate router when fatigued or under the influence of

drugs, alcohol, or any medication.

ROUTING GROOVES

See Figure 15.

When routing across the face of boards, set router at

desired depth of cut, place the edge of router base

against workpiece, and turn on the router. Slowly feed

the cutter into the workpiece along desired line of cut.

WARNING:

If desired depth of cut is greater than can be safely

cut in one pass, make cuts in two or more passes.

When routing straight cuts across stock, clamp a straight

edge to the workpiece to use as a guide. Position the

straightedge parallel to the line of cut and offset the

distance between the cutting edge of the cutter and the

edge of the router base. Hold the router base against the

straightedge and rout the groove.

When routing a groove wider than the diameter of the

cutter, clamp a straightedge on both sides of the cutlines.

Position both guides parallel to the desired line of cut and

spaced equal distances from the desired edges of the

groove. Rout along one guide; then, reverse direction

and rout along the other guide. Clean out any remaining

waste in the center of the groove freehand.

Fig. 15

Fig. 14

OPERATION

Fig. 13

O = OFF

I = ON

MOTOR

HOUSING

SWITCH

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi RE180PL1 Manuel d'utilisateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs Ryobi RE180PL1