Ryobi RE180PL1 Manuel d'utilisateur télécharger pdf (Page 23)

ACCESSORIES

WARNING:

When using a UL listed router table, large router bits

should be used for edging only. Do not use router

bits that are larger in diameter than the opening in

the router base for any purpose. Failure to heed this

warning could result in serious personal injury.

WARNING:

Do not use with router tables that are not UL listed

and that fail to conform to safe woodworking prac-

tices and offer proper guarding for the cutter. Failure

to comply can result in an accident causing possible

serious injury.

WARNING:

The use of this router in table mounted applications

requires the use of the optional depth control knob.

Failure to use this optional depth control knob could

result in an accident and possible serious personal

injury.

OPTIONAL STRAIGHT GUIDE

An optional straight guide, part number 6090080, is

available and may be purchased for use with your router.

OPTIONAL DEPTH CONTROL KNOB

An optional depth control knob, part number 4830175, is

available, which allows you to easily adjust the depth of

cut when using the router mounted upside down to a

router table.

ROUTER TABLE

When mounting your router to a router table, use the two

5/16-18 UNC-2A flathead screws supplied. These screws

will secure your router to the router table properly. Use

of any other type and size screws could result in an

accident causing possible serious injury. Do not use

8 mm screws.

1 2 ... 18 19 20 21 22 23 24

Pas de commentaire

Ryobi RE180PL1 Manuel d'utilisateur Page 23