Ryobi RE180PL1 Manuel d'utilisateur télécharger pdf (Page 4)

SPECIFIC SAFETY RULES

Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact

hidden wiring or its cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

ADDITIONAL SAFETY RULES

■ Know your power tool. Read operator’s manual

carefully. Learn its applications and limitations,

as well as the specific potential hazards related

to this tool. Following this rule will reduce the risk

of electric shock, fire, or serious injury.

■ Always wear safety glasses. Everyday eye-

glasses have only impact-resistant lenses; they

are NOT safety glasses. Following this rule will re-

duce the risk of serious personal injury.

■ Protect your lungs. Wear a face or dust mask if

the operation is dusty. Following this rule will re-

duce the risk of serious personal injury.

■ Protect your hearing. Wear hearing protection

during extended periods of operation. Following

this rule will reduce the risk of serious personal in-

jury.

■ Inspect tool cords periodically and, if damaged,

have repaired at your nearest Factory Service

Center or other Authorized Service Organization.

Constantly stay aware of cord location. Follow-

ing this rule will reduce the risk of electric shock or

fire.

■ Check damaged parts. Before further use of the

tool, a guard or other part that is damaged should

be carefully checked to determine that it will

operate properly and perform its intended func-

tion. Check for alignment of moving parts, bind-

ing of moving parts, breakage of parts, mount-

ing, and any other conditions that may affect its

operation. A guard or other part that is damaged

should be properly repaired or replaced by an

authorized service center. Following this rule will

reduce the risk of shock, fire, or serious injury.

■ Do not abuse cord. Never carry the tool by the

cord or yank it to disconnect it from the recep-

tacle. Keep cord away from heat, oil, and sharp

edges. Following this rule will reduce the risk of elec-

tric shock or fire.

■ Make sure your extension cord is in good condi-

tion. When using an extension cord, be sure to

use one heavy enough to carry the current your

product will draw. A wire gage size (A.W.G.) of at

least 16 is recommended for an extension cord

100 feet or less in length. A cord exceeding 100

feet is not recommended. If in doubt, use the next

heavier gage. The smaller the gage number, the

heavier the cord. An undersized cord will cause a

drop in line voltage resulting in loss of power and

overheating.

■ Inspect for and remove all nails from lumber be-

fore routing. Following this rule will reduce the risk

of serious personal injury.

■ Drugs, alcohol, medication. Do not operate tool

while under the influence of drugs, alcohol, or

any medication. Following this rule will reduce the

risk of electric shock, fire, or serious personal injury.

■ Save these instructions. Refer to them frequently

and use them to instruct others who may use

this tool. If you loan someone this tool, loan them

these instructions also.

WARNING:

Some dust created by power sanding, sawing, grind-

ing, drilling, and other construction activities con-

tains chemicals known to cause cancer, birth de-

fects or other reproductive harm. Some examples of

these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement

and other masonry products, and

• arsenic and chromium from chemically-

treated lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are

specially designed to filter out microscopic particles.

SERVICE

■ Tool service must be performed only by quali-

fied repair personnel. Service or maintenance per-

formed by unqualified personnel could result in a risk

of injury.

■ When servicing a tool, use only identical replace-

ment parts. Follow instructions in the Mainte-

nance section of this manual. Use of unauthorized

parts or failure to follow Maintenance Instructions

may create a risk of electric shock or injury.

GENERAL SAFETY RULES

1 2 3 4 5 6 7 8 9 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Ryobi RE180PL1 Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs Ryobi RE180PL1