Ryobi RE180PL1 Manuel d'utilisateur Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 24
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
7
HEAVY DUTY MOTOR
Your router has a powerful 10 amp motor with sufficient
power to handle tough routing jobs. It delivers 2
horsepower for heavy duty performance. The motor also
has externally accessible brushes for ease of servicing.
SWITCH
To turn the router ON, toggle the switch to the I position.
To turn the router OFF, toggle the switch to the O
position.
DEPTH STOP SYSTEM
The Accu-Stop™ Micro-Adjustable depth stop located
on the base of your router provides precise stops for
repetitive depth of cut changes. A depth adjustment
scale makes quick adjustments to depth of cut changes
possible.
CHIP SHIELD
A plastic chip shield has been provided on the base of
your router for protection against flying dust and chips.
It is designed to fit the front opening of the router base.
SPINDLE LOCK
A spindle lock secures the spindle so that only one
wrench is needed to loosen collet nut and change
cutters. NOTE: Do not run router with spindle lock
engaged.
VARIABLE SPEED
Your router has advanced electronic features, designed
to assist you in getting the maximum use from your
router. By making proper speed selections, your router
can be adjusted to specfic routing needs. This eliminates
much of the guess work previously needed to perform
operations on UL listed router tables when used with the
optional depth control knob.
The variable speed control allows the router to develop
a no load speed that can be adjusted from 15,000 to
23,000 RPM. The variable speed control selector is
conveniently located on the front of the router.
The electronic feature of your router introduces the
flexibility of adjusting the motor speed to required job
conditions. An electronic speed control module senses
the load applied to the motor, and increases or decreases
motor voltage to compensate for and maintain desired
RPM.
FEATURES
Speed can be set according to the approximate cutter
diameter you will be using and to the hardness of the
material being cut. The best cuts are made when the
cutter is fed through material at the proper rate of feed.
PLUNGE LOCK LEVER
Your router has a plunge lock lever that allows for free
plunging. This feature is very useful for table mounted
operations on UL listed router tables when used with the
optional depth control knob. Unlocking the plunge lock
lever allows for a smooth, precise plunging action. Once
you reach the desired depth of cut, simply lock the
plunge lock lever. The cutter will then be secured at the
desired depth of cut.
ERGONOMIC DESIGN
The design of this tool provides for easy handling. It is
designed for comfort and ease of grasp when operating
in different positions and at different angles.
ELECTRICAL CONNECTION
Your router has a precision built electric motor. It should
be connected to a power supply that is 120 volts, 60
Hz, AC only (normal household current). Do not
operate this tool on direct current (DC). A voltage drop of
more than 10 percent will cause a loss of power and
overheating. If your tool does not operate when plugged
into an outlet, double-check the power supply.
DOUBLE INSULATION
Double insulation is a concept in safety in electric power
tools, which eliminates the need for the usual three-wire
grounded power cord. All exposed metal parts are
isolated from the internal metal motor components with
protecting insulation. Double insulated tools do not need
to be grounded.
WARNING:
The double insulated system is intended to protect
the user from shock resulting from a break in the
tool's internal wiring. Observe all normal safety pre-
cautions to avoid electrical shock.
Important: Servicing of a tool with double insulation
requires extreme care and knowledge of the system and
should be performed only by a qualified service
technician. For service, we suggest you return the tool to
your nearest authorized service center for repair.
Your plunge router is a versatile woodworking tool that will give you years of trouble-free performance. It is engineered
with the professional in mind, but its ease of operation allows the amateur to produce work that is beautiful and
precise. As the name implies your plunge router can be used for making plunge cuts in workpieces, routing grooves,
edge routing, routing circles, and freehand routing. When used with recommended accessories, such as a UL listed
router table, depth adjusment knob, and straight guide; it becomes even more versatile. Various types of cutters, both
with and without roller bearings as guides, also add to the versatility of this tool.
Vue de la page 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Commentaires sur ces manuels

Pas de commentaire