Ryobi HP1442M Manuel d'utilisateur télécharger pdf (Page 3)

Page 3

Tool Use and Care

■ Use clamps or other practical way to secure and

support the workpiece to a stable platform. Holding

the work by hand or against your body is unstable and

may lead to loss of control.

■ Do not force tool. Use the correct tool for your appli-

cation. The correct tool will do the job better and safer

at the rate for which it is designed.

■ Do not use tool if switch does not turn it on or off. A

tool that cannot be controlled with the switch is danger-

ous and must be repaired.

■ Disconnect battery pack from tool before making any

adjustments, changing accessories, or storing the

tool. Such preventive safety measures reduce risk of

starting the tool accidentally.

■ Store idle tools out of reach of children and other

untrained persons. Tools are dangerous in the hands

of untrained users.

■ When battery pack is not in use, keep it away from

other metal objects like: paper clips, coins, keys,

nails, screws, or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

sparks, burns, or a fire.

■ Maintain tools with care. Keep cutting tools sharp

and clean. Properly maintained tools, with sharp cutting

edges are less likely to bind and are easier to control.

■ Check for misalignment or binding of moving parts,

breakage of parts, and any other condition that may

affect the tool's operation. If damaged, have the tool

serviced before using. Many accidents are caused by

poorly maintained tools.

■ Use only accessories that are recommended by the

manufacturer for your model. Accessories that may

be suitable for one tool, may create a risk of injury when

used on another tool.

Service

■ Tool service must be performed only by qualified

repair personnel. Service or maintenance performed

by unqualified personnel could result in a risk of injury.

■ When servicing a tool, use only identical replace-

ment parts. Follow instructions in the Maintenance

section of this manual. Use of unauthorized parts or

failure to follow Maintenance Instructions may create a

risk of shock or injury.

Additional Rules For Safe Operation

■ Know your power tool. Read operator's manual care-

fully. Learn its applications and limitations, as well

as the specific potential hazards related to this tool.

Following this rule will reduce the risk of electric shock,

fire, or serious injury.

■ Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one

heavy enough to carry the current your product will

draw. A wire gage size (A.W.G.) of at least 16 is

recommended for an extension cord 100 feet or less

in length. A cord exceeding 100 feet is not recom-

mended. If in doubt, use the next heavier gage. The

smaller the gage number, the heavier the cord. An

undersized cord will cause a drop in line voltage resulting

in loss of power and overheating.

Important Rules for Battery Tools

■ Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in operat-

ing condition. Be aware of possible hazards when

not using your battery tool or when changing acces-

sories. Following this rule will reduce the risk of electric

shock, fire, or serious personal injury.

■ Do not place battery tools or their batteries near fire

SPECIFIC SAFETY RULES AND/OR SYMBOLS

Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden

wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.

or heat. This will reduce the risk of explosion and

possibly injury.

WARNING:

Batteries vent hydrogen gas and can explode in the

presence of a source of ignition, such as a pilot light. To

reduce the risk of serious personal injury, never use any

cordless product in the presence of open flame. An

exploded battery can propel debris and chemical. If

exposed, flush with water immediately.

■ Do not charge battery tool in a damp or wet location.

Following this rule will reduce the risk of electric shock.

■ For best results, your battery tool should be charged

in a location where the temperature is more than 50°F

but less than 100°F. Do not store outside or in ve-

hicles.

■ Under extreme usage or temperature conditions,

battery leakage may occur. If liquid comes in contact

with your skin, wash immediately with soap and

water, then neutralize with lemon juice or vinegar. If

liquid gets into your eyes, flush them with clean

water for at least 10 minutes, then seek immediate

medical attention. Following this rule will reduce the risk

of serious personal injury.

GENERAL SAFETY RULES

1 2 3 4 5 6 7 8 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Ryobi HP1442M Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Ryobi HP1442M