Ryobi P635 Manuel d'utilisateur télécharger pdf (Page 3)

3 — English

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

To reduce the risks of

fire or explosion, electric shock, and the injury to per-

sons, read and understand all instructions included in

this manual. Be familiar with the controls and the proper

usage of the equipment.

READ ALL INSTRUCTIONS

     Read the operator’s

manual carefully. Learn the machine’s applications and

limitations as well as the specific potential hazards related

to this tool.

WARNING: To reduce the risk of fire or explosion:

 Do not spray flammable or combustible materials near

an open flame or sources of ignition such as cigarettes,

motors, and electrical equipment.

 For units intended for use with only water-based or mineral

spirit-type materials with a minimum flash point of 60°C

(140°F), do not spray or clean with liquids having a flash

point less than 60°C (140°F).

 Paint or solvent flowing through the equipment is able to

result in static electricity. Static electricity creates a risk

of fire or explosion in the presence of paint or solvent

fumes.

 Do not use a paint or a solvent containing halogenated

hydrocarbons.

 Keep spray area well ventilated. Keep a good supply of

fresh air moving through the area. Keep pump assembly

in a well ventilated area. Do not spray pump assembly.

 Do not smoke in the spray area.

 Do not operate light switches, engines, or similar spark

producing products in the spray area.

 Keep area clean and free of paint or solvent containers,

rags, and other flammable materials.

 Know the contents of the paints and solvents being

sprayed. Read all Material Safety Data Sheets (MSDS) and

container labels provided with the paints and solvents.

Follow the paint and solvent manufacturer’s safety

instructions.

 Fire extinguisher equipment shall be present and

working.

WARNING: To reduce the risk of skin injection:

 Do not aim the nozzle at, or spray any person or

animal.

 Keep hands and other body parts away from the discharge.

For example, do not try to stop leaks with any part of the

body.

 Always use the spray tip. Do not spray without spray tip

in place.

 Only use a spray tip specified by the manufacturer.

 Use caution when cleaning and changing spray tips. In

the case where the spray tip clogs while spraying, follow

the manufacturer’s instructions for turning off the unit

before removing the spray tip to clean.

 Do not leave the unit energized while unattended. When

the unit is not in use, turn off the unit in accordance with

the manufacturer’s instructions.

 High pressure spray is able to inject toxins into the body

and cause serious bodily injury. In the event that injection

occurs, seek medical attention immediately.

 Check hoses and parts for signs of damage. Replace any

damaged hoses or parts.

 This system is capable of producing 2500 psi. Only use

replacement parts or accessories that are specified by

the manufacturer and that are rated a minimum of 2500

psi.

 Know how to stop the unit and bleed pressure quickly.

Be thoroughly familiar with the controls.

 Verify that all connections are secure before operating

this unit.

 For household use only.

WARNING: To reduce the risk of injury:

 Do not operate or spray near children. Keep children away

from equipment at all times.

 Do not overreach or stand on an unstable support. Keep

effective footing and balance at all times.

 Stay alert and watch what you are doing.

 Do not operate the unit when fatigued or under the

influence of drugs or alcohol.

 Do not kink or overbend the hose.

 Do not expose the hose to temperatures or to pressures

in excess of those specified by the manufacturer.

 Do not use the hose as a strength member to pull or lift

the equipment.

1 2 3 4 5 6 7 8 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Ryobi P635 Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Ryobi P635