Ryobi RY9904 Manuel d'instructions télécharger pdf (Page 4)

3. Use & Function

IMPORTANT: Always remove the power plug

from the electrical outlet before assembling or

removing accessories.

1. Insert the handle

into the top of the

vacuum cleaner.

(Fig.3/1).

4. How to Operate

On/Off Pedal

Plug the cord into an electrical outlet. Turn

the vacuum cleaner on by pressing the on/

off switch located on the lower side of the

cleaner (Fig.4/1). The cleaner can be turned

off by pressing the on/off switch again.

Telescopic Handle

The telescopic handle is adjustable. Push the

handle adjuster button to slide the handle up

and down. (Fig.4/1).

The telescopic handle can also be used as an

extension tube when using the accessories

(see section 5).

4 5

6. Dirt Container & Filter:

Removal & Replacement

IMPORTANT: Always unplug the vacuum

cleaner from the electrical outlet before

emptying the dirt container.

IMPORTANT: Do NOT use the vacuum

without the HEPA ﬁlter in place.

1. To remove the dirt container, press the dirt

container release button and lift away from

the vacuum cleaner (Fig 6/1).

Auto Cord Rewind

Unplug the vacuum cleaner from the electrical

outlet. Press the auto cord rewind pedal and

guide the power cord with one hand. Rewind

1-1

1

/

2

metres of cord at a time. This will

prevent the cord from whipping which could

cause damage or injury. (Fig.4/2).

Fig.4/2

Adjustment for Floor Types

The vacuum cleaner has a brushbar height

adjuster that raises and lowers the brushbar

to suit different carpet types. With the cleaner

NOT connected to the electrical outlet, set the

adjustment to the lowest setting for maximum

cleaning. If the cleaner is difﬁcult to move, push

the knob to the next highest setting until the

vacuum cleaner is comfortable to push. The

brushbar must reach the carpet for effective

cleaning. (Fig.4/3).

To use the telescopic handle, release the

handle by pushing the handle release button

and connect the hose to the top of the

telescopic handle (Fig.5/3).

Attach the desired accessory to the end of

the telescope handle (Fig.5/4).

CAUTION:

The brushbar continues to rotate

while the hose is removed and at all times

when the vacuum cleaner is on. Keep hair,

loose clothing, ﬁngers and all parts of the body

away from the brush area while the vacuum

cleaner is on. The vacuum cleaner must be in

the upright position to lift the rotating brushbar

off the carpet when cleaning with extendible

hose. When using tools/accessories, the

brushbar height adjuster should be turned to

its highest position.

5. Accessories

Crevice Tool

Use the crevice tool for crevices, corners,

skirting boards and between cushions.

Dusting brush

Use the dusting brush on soft furnishings.

Attaching the Accessories

The crevice tool and dusting brush can be

used with or without the telescopic handle.

To attach the accessory to the hose, remove

the hose from the machine (Fig.5/1) and push

the accessory onto the end (Fig.5/2).

3. Empty all the dirt

from the container

(Fig.6/3).

4. Remove the HEPA

ﬁlter by twisting

anti-clockwise and

pulling out (Fig.6/4).

NOTE: The white

material in the HEPA

ﬁlter will discolour over

time - This is NORMAL

and will NOT affect the

performance of the ﬁlter.

5. Firmly tap clean the HEPA ﬁlter until no

more dust is observed falling out (Fig.6/5).

Fig.3/1

Fig.4/1

Power

On/off

Fig.4/3

Fig.5/1

Fig.5/2

Fig.5/3

Fig.5/4

Fig.6/1

2. Release the

bottom of the

dirt container

by pushing the

button located

at the back of the

dirt container.

(Fig.6/2).

Fig.6/2

Fig.6/3

Fig.6/4

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire