Ryobi SS180 Manuel de l'opérateur télécharger pdf (Page 3)

GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to

follow all instructions listed below, may result in

electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

■ Keep your work area clean and well lit. Cluttered

benches and dark areas invite accidents.

■ Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable

liquids, gases, or dust. Power tools may create

sparks which may ignite the dust or fumes.

■ Keep bystanders, children, and visitors away

while operating a power tool. Distractions can

cause you to lose control.

ELECTRICAL SAFETY

■ Do not abuse the cord. Never use the cord to

carry the charger. Keep cord away from heat, oil,

sharp edges, or moving parts. Replace damaged

cords immediately. Damaged cords may create a

fire.

■ A battery operated tool with integral batteries or

a separate battery pack must be recharged only

with the specified charger for the battery. A

charger that may be suitable for one type of battery

may create a risk of fire when used with another

battery. Use battery only with charger listed.

MODEL BATTERY CHARGER

SS180 1322401, 1323303 1423701

■ Use battery operated tool only with specifically

designated battery pack. Use of any other batteries

may create a risk of fire. Use only with battery pack

listed.

PERSONAL SAFETY

■ Stay alert, watch what you are doing, and use

common sense when operating a power tool. Do

not use tool while tired or under the influence of

drugs, alcohol, or medication. A moment of inat-

tention while operating power tools may result in

serious personal injury.

■ Dress properly. Do not wear loose clothing or

jewelry. Contain long hair. Keep your hair, cloth-

ing, and gloves away from moving parts. Loose

clothes, jewelry, or long hair can be caught in mov-

ing parts.

■ Avoid accidental starting. Be sure switch is in

the locked or off position before inserting bat-

tery pack. Carrying tools with your finger on the

switch or inserting the battery pack into a tool with

the switch on invites accidents.

■ Remove adjusting keys or wrenches before turn-

ing the tool on. A wrench or a key that is left at-

tached to a rotating part of the tool may result in

personal injury.

■ Do not overreach. Keep proper footing and bal-

ance at all times. Proper footing and balance en-

ables better control of the tool in unexpected situa-

tions. Do not use on a ladder or unstable support.

■ Use safety equipment. Always wear eye protec-

tion. Dust mask, non-skid safety shoes, hard hat, or

hearing protection must be used for appropriate con-

ditions.

TOOL USE AND CARE

■ Use clamps or other practical way to secure and

support the workpiece to a stable platform. Hold-

ing the work by hand or against your body is un-

stable and may lead to loss of control.

■ Do not force tool. Use the correct tool for your

application. The correct tool will do the job better

and safer at the rate for which it is designed.

■ Do not use tool if switch does not turn it on or

off. A tool that cannot be controlled with the switch

is dangerous and must be repaired.

■ Disconnect battery pack from tool or place the

switch in the locked or off position before mak-

ing any adjustments, changing accessories, or

storing the tool. Such preventive safety measures

reduce risk of starting the tool accidentally.

■ Store idle tools out of reach of children and other

untrained persons. Tools are dangerous in the

hands of untrained users.

■ When battery pack is not in use, keep it away

from other metal objects like: paper clips, coins,

keys, nails, screws, or other small metal objects

that can make a connection from one terminal

to another. Shorting the battery terminals together

may cause sparks, burns, or a fire.

■ Maintain tools with care. Keep cutting tools sharp

and clean. Properly maintained tools with sharp

cutting edges are less likely to bind and are easier

to control.

■ Check for misalignment or binding of moving

parts, breakage of parts, and any other condi-

tion that may affect the tool's operation. If dam-

aged, have the tool serviced before using. Many

accidents are caused by poorly maintained tools.

■ Use only accessories that are recommended by

the manufacturer for your model. Accessories that

may be suitable for one tool, may create a risk of

injury when used on another tool.

1 2 3 4 5 6 7 8 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Ryobi SS180 Manuel de l'opérateur Page 3

Commentaires sur ces manuels