Ryobi R1801M1 Manuel d'utilisateur télécharger pdf (Page 11)

OPERATION

WARNING:

Never connect the router to power supply when you are

assembling parts, making adjustments, installing or re-

moving cutters, or when not in use. Disconnecting the

router prevents accidental starting that could cause se-

rious injury.

REMOVING AND INSTALLING THE ROUTER

BASE

TO REMOVE THE ROUTER BASE

See Figure 4.

1. Unplug the router.

WARNING:

Failure to unplug the tool could result in accidental start-

ing causing serious injury.

2. Place the router upside down with the Ryobi label

away from you.

3. Loosen the locking arm on the base.

4. Depress and hold the gold spindle lock button. The

gold spindle lock button will not depress fully unless it

is in line with the hole in the collet.

5. If the gold spindle lock button does not depress fully,

turn the collet nut while depressing the gold spindle

lock button. As they align, the gold spindle lock button

will depress fully.

6. Turn the depth adjusting ring counterclockwise until

the motor is to its highest position. NOTE: As the

motor is rising, the gold spindle lock button has to be

depressed until it clears the rear window.

7. Align the indicator arrow on the depth adjustment ring

with the indicator point on the base.

8. Pull the base until it dislodges from the motor housing.

TO INSTALL THE ROUTER BASE

1. Unplug the router.

2. Place the fixed or D-handle base on a flat surface.

3. Loosen the locking arm.

4. Align the indicator arrow on the depth adjustment ring

with the indicator point on the base.

5. Align the groove in the motor housing with the tab

inside of the base. NOTE: The tab is located on the

inside of the base in line with the handle.

6. Depress and hold the gold spindle lock button on the

motor.

7. Slide the motor housing into the base.

8. Turn the depth adjusting ring counterclockwise until

the gold spindle lock snaps out as it clears the rear

window, just below the locking arm.

9. Tighten the locking arm.

Fig. 4

LOCKING

ARM

DEPTH

ADJUSTMENT

RING

GOLD

SPINDLE LOCK

BUTTON

15/32

1/32

DEPTH

INDICATOR

RING

INDICATOR POINT

INDICATOR

ARROW

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Ryobi R1801M1 Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs Ryobi R1801M1