Ryobi RT102 Manuel d'utilisateur télécharger pdf (Page 12)

1 rev=1/8”

ASSEMBLY

ATTACHING THE ROUTER GUARD TO THE

ROUTER

See Figure 9.



Place the router guard on the back of the router.



Align the slots in the guard with the holes in the router.

Secure the

router guard

to the router with the two guard

screws.

ATTACHING THE ROUTER TO THE TABLE

See Figure 10.

Attach the router to the router table after you have assembled

the table and installed the

router guard

Place the router table right side up with the front edge

closest to you.



Be sure the table is stable and rests on all four legs.

Hold the router upside down so that the back of the router

faces you.

Align the holes in the center of the table with the holes in

the router.

NOTE: To attach router, use the two right holes and the

back left hole.

Hold the router with one hand and securely tighten each

of the flat head screws with the other hand.

MOUNTING THE TABLE TO A WORK

TABLE

See Figures 11 - 12.

Place the router table right side up on a sturdy work

surface; e.g., work stand, workbench, counter top.

Mark the holes with a pencil.

Remove the router table.

Drill four holes through the work surface.

Place the router table back on the work surface, align-

ing the holes in the table legs with the holes in the work

surface.

NOTE: Position the router table surface at approximately

hip height.

Insert four bolts (not included, 1/4-20 recommended) and

tighten securely with flat washers, lock washers, and hex

nuts (not included).

NOTE: If you plan to transport the router table to different

locations, we recommend that you attach it permanently

to a mounting board that you can easily clamp to a work

table.

Fig. 9

Fig. 11

Fig. 12

Fig. 10

BoLTS

HEX NUT

WoRK TABLE

FLAT

WASHER

CLAMPS

MoUNTING

BoARD

WoRK TABLE

FRoNT EDGE

HoLES

FLAT HEAD

SCREW

GUARD

SCREWS

RoUTER

GUARD

LoCK WASHER

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Commentaires sur ces manuels

Pas de commentaire

Ryobi RT102 Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour la vidéo Ryobi RT102