Ryobi CSB130JS Manuel d'utilisateur télécharger pdf (Page 2)

REPLACING LOWER BLADE GUARD HANDLE

See Figure 4.

■ Using a Phillips screwdriver, remove the two screws that

secure lower blade guard handle to lower blade guard.

■ Remove and discard your original lower blade guard

handle.

■ Position your new replacement lower blade guard handle

on lower blade guard as shown in figure 4.

Note: The new handle can be identified by the red marking

on the inside of the handle.

■ Secure lower blade guard handle to lower blade guard

using the two Phillips head screws removed above.

■ Tighten screws securely.

WARNING:

Failure to securely tighten lower blade guard handle

screws could result in serious personal injury.

■ Reinstall blade on your circular saw.

See Figure 5.

Refer

to your saw’s operator’s manual.

■ Place the outer blade washer and spring washer in place.

■ Tighten the blade bolt securely, using the 9/16 in. blade

wrench supplied with your saw.

WARNING:

Failure to place the outer blade washer and the spring

washer in place or failure to tighten the blade bolt securely

could result in serious personal injury.

■ Check for smooth operation of lower blade guard before

plugging saw into power supply.

Fig. 4

LOWER BLADE GUARD

LOWER BLADE

GUARD HANDLE

LOWER BLADE

GUARD HANDLE

SCREWS

WASHER

Fig. 5

SPINDLE

LOWER BLADE

GUARD HANDLE

BLADE

OUTER BLADE

WASHER

("D" WASHER)

BLADE

SCREW

SPRING

WASHER

INNER FLANGE BUSHING

(MODELS CSB130, CSB130JS AND CSB1308)

INNER BLADE WASHER

(MODEL CSB120)

IF YOU EXPERIENCE ANY PROBLEMS OR NEED FURTHER ASSISTANCE

WITH MAKING THE REPAIRS IN THIS KIT, CALL 1-800-867-9624.

1 2

RYOBI TECHNOLOGIES INC 1
WARNING: 2

Commentaires sur ces manuels

Pas de commentaire

Ryobi CSB130JS Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Scies circulaires Ryobi CSB130JS