Ryobi TS1142L Manuel de l'opérateur télécharger pdf (Page 29)

ADJUSTMENTS

TO ADJUST THE MITER LOCK LEVER

See Figure 37.

Prior to squaring the saw blade to the fence, check and adjust

the miter lock lever, if needed. In the “locked” position, the

action of fully locking the miter lock lever should feel tight

and secure. Considerable effort should be required to move

the miter table. If the table moves easily when in the “locked”

position, an adjustment of the miter lock lever is required.

To adjust:

 Unplug the saw.

 Lock the miter lock lever completely.

 Pull the miter lock lever out to the right to disengage, then

rotate forward to adjust.

 Release miter lock lever to re-engage

 Recheck the miter table to ensure proper tightness.

Fig. 37

LOCK

UNLOCK

MITER

LOCK

LEVER

1 2 ... 24 25 26 27 28 29 30 31 32

Pas de commentaire

Ryobi TS1142L Manuel de l'opérateur Page 29