Ryobi RGBV3100 Manuel d'utilisateur télécharger pdf (Page 12)

MAINTENANCE AND REPAIR INSTRUCTIONS

Fig. 25

Fig. 23

Fig. 24

Choke Lever

Screws

AIR FILTER MAINTENANCE

Removing the Air Filter/Muffler Cover

1. Place the choke lever in Position B.

NOTE: The choke lever must be in Position B (Fig. 21) to

remove the air filter/muffler cover.

2. Remove the four (4) screws securing the air

filter/muffler cover (Fig. 21). Use a flat blade or T-20

Torx bit screwdriver.

3. Pull the cover from the engine. Do not force.

Cleaning the Air Filter

Clean and re-oil the air filter every 10 hours of operation.

It is an important item to maintain. Not maintaining the

air filter will VOID the warranty.

1. Remove the air filter/muffler cover. See Removing

the Air filter/Muffler Cover.

2. Remove the air filter from behind the air filter/muffler

cover (Fig. 22).

3. Wash the filter in detergent and water (Fig. 23). Rinse

the filter thoroughly. Squeeze out excess water.

Allow it to dry completely.

4. Apply enough clean oil to lightly coat the filter

(Fig. 24).

5. Squeeze the filter to spread and remove excess oil

(Fig. 25).

6. Replace the air filter in the air filter/muffler cover

(Fig. 22).

NOTE: Operating the unit without the air filter and air

filter/muffler cover assembly, will VOID the

warranty.

Reinstalling the Air Filter/Muffler Cover

1. Place the air filter/muffler cover over the back of the

carburetor and muffler.

NOTE: The choke lever must be in Position B (Fig. 21) to

install the air filter/muffler cover.

Fig. 21

Air Filter

Fig. 22

2. Insert the four (4) screws into the holes in the air

filter/muffler cover (Fig. 21) and tighten. Use a flat

blade or T-20 Torx bit screwdriver. Do not over

tighten. Do not force.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 87 88

Commentaires sur ces manuels

Pas de commentaire

Ryobi RGBV3100 Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Ventilateurs Ryobi RGBV3100