Ryobi RY41002 Manuel d'utilisateur télécharger pdf (Page 16)

Page 16

1. Lubricate with a silicone spray.

2. Install more line (Refer to “Replacing the

Cutting Line” earlier in this manual).

3. Pull lines while alternately pressing down on

and releasing spool retainer.

4. Remove line from spool and rewind (Refer to

“Replacing the Cutting Line” earlier in this

manual).

Clean threads and lubricate with grease. If no

improvement, replace spool retainer.

Cut tall grass from the top down.

Line will not advance when tap

retaining cap

Retaining cap is hard to turn

Grass wraps around the

attachment shaft and the

trimmer head assembly

1. Line is welded to itself.

2. Not enough line on spool.

3. Line is worn too short.

4. Line is tangled on spool.

Screw threads are dirty or dam-

aged.

Cutting tall grass at ground level.

PROBLEM POSSIBLE CAUSE SOLUTION

TROUBLESHOOTING

1 2 ... 11 12 13 14 15 16 17 18

Commentaires sur ces manuels

Pas de commentaire