Ryobi RY30943 Manuel de l'opérateur Page 13

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 26
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 12
ATTACHING THE SHOULDER HARNESS -
BC30
See Figure 9.
[] Connect the latch on the shoulder harness to the strap
hanger.
[] Adjust the strap to a comfortable position.
CONVERTING FROM BRUSHCUTTER TO
STRING TRIMMER - BC30
To convert from the brushcutter to the string trimmer, remove
the blade and brushcutter guard, attach the straight shaft
grass deflector and install the string head.
REMOVING THE TRI-ARC ® BLADE AND
BRUSHCUTTER GUARD
See Figures 10 - 11.
[] Align the slot in the flanged washer with the slot in the
gear head.
[] Place the gear head locking tool through the slot in the
flanged washer and gear head.
[] Remove the blade nut by turning it clockwise.
[] Remove the cupped washer and the blade.
[] Remove the flanged washer from the gear head shaft and
retain it for the string head installation.
[] Remove the three screws securing the brushcutter guard
to gear head.
[] Remove the brushcutter guard.
NOTE: Store the brushcutter parts together for later use.
INSTALLING THE STRAIGHT SHAFT GRASS
DEFLECTOR AND STRING HEAD
See Figures 10- 12.
[] Install the grass deflector. Refer to To Attach the Straight
Shaft Grass Deflector earlier in this manual.
[] Place the flanged washer on the gear head shaft.
NOTE: The hollow side of the flanged washer should face
the gear head.
[] Align the slot in the flanged washer with the slot in the
gear head.
[] Place the gear head locking tool through the slot in the
flanged washer and gear head.
[] Install the string head assembly onto the gear head shaft
by turning counterclockwise.
[] Tighten the string head assembly securely.
CONVERTING FROM STRING TRIMMER TO
BRUSHCUTTER - BC30
To convert from the string trimmer to the brushcutter, remove
the string head assembly and straight shaft grass deflector,
attach the brushcutter guard and install the blade.
LATCH
Fig. 9
Fig. 10
GEARHEAD
8LOT BRUSHCUTTER
FLANGED
CUPPED
WASHER
BLADENU] Fig. 11
GEARHEAD
13
LOOSEN TIGHTEN
Vue de la page 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Commentaires sur ces manuels

Pas de commentaire