Ryobi TB720r Manuel de l'opérateur télécharger pdf (Page 9)

-...

Cutting Attachment

Shield

Shield Mount

Cutting Attachment

................... Fig. 6 ........

2. Place a he× lock nut into one of the three recessed

holes on the top of the cutting attachment shield

(Fig 7.

Cutting Attachment

Shield

........... Fig. 5 ......

INSTALLING THE CUTTING ATTACHMENT

SHIELD

Use the following instructions if the cutting attachment

shield on your unit is not installed.

[ ,_ WARNING: Never operate the trimmer [

without the cutting attachment shield in

place to prevent serious personal injury.

Slide the cutting attachment shield into the shield

mount on the cutting attachment, Align the screw

holes in the shieJd with the holes in the cutting

attachment (Fig. 6),

.................. Fig. 7 ....................

3. Install a screw into the hole from the bottom of the

cutting attachment shield and screw it into the nut

installed in step #2 (Fig 8). Do not tighten.

4. Repeat steps 2 and 3 until al_three screws have

been started, then tighten securely.

__ Screws

........ Fig, 8 ..............

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Pas de commentaire

Ryobi TB720r Manuel de l'opérateur Page 9