12
English (Original Instructions)
order in which they were removed.
■ Torque the blade nut down clockwise using a torque
wrench (not provided) to ensure the bolt is properly
tightened. The recommended torque for the blade nut
is 62.5~71.5 kgfcm (350-400 in.-lb.).
■ To reduce the fire hazard, keep the motor and battery
compartment free of grass, leaves, or excessive
grease.
DRIVE GEAR MAINTENANCE
See gure 16.
To ensure smooth operation of wheels, the wheel
assembly should be cleaned before storage.
■ Remove the nut by turning counter clockwise. Remove
wheel and set aside.
■ Remove dust cover, e-ring, washer, pins, and wheel
gear. Clean any dirt from these items and the end of
the drive shaft by wiping with a dry cloth. If necessary,
rubbing alcohol may be used to remove any stubborn
dirt.
■ Reinstall wheel gear with the arrows facing the front of
the mower. Reinstall pins, washer, e-rings, and dust
cover.
■ Reinstall wheel and nut. Tighten nut clockwise to
secure.
REPLACING FRONT WHEELS
See gure 17.
■ Using a hex wrench (not provided), remove the hex
nut by turning counterclockwise.
■ Remove the wheel and replace with new wheel.
■ Replace the hex nut and tighten securely by turning
clockwise.
STORING THE MOWER
See gure 2.
■ Remove the isolator key and store in separate location
out of reach of children.
■ Removal of the battery is not required for storage.
■ When the battery pack is not in use, store it in an
environment of 25 ˚C and recharge it every 2 months.
■ Before storage, wipe any dirt or debris from the battery
area.
■ Turn mower on its side and clean grass clippings that
have accumulated on the underside of the mower
deck.
■ Wipe the mower clean with a dry cloth occasionally.
Do not use water.
■ Check all nuts, bolts, knobs, screws, fasteners, etc.,
for tightness.
■ Inspect moving parts for damage, breakage, and
wear. Have repairs made on any damaged or missing
parts. Check blade for damage, uneven, or excessive
wear and replace blade if these conditions exist.
■ Store mower indoors in a clean, dry place out of the
reach of children.
■ Do not store near corrosive materials such as fertilizer
or rock salt.
To lower the handle before storing:
■ Fully loosen the handle knobs on the sides of the
handle and fold the upper handle down.
■ Push inward on each side of the lower handle, and
lift the sides of the lower handle past the edges of the
handle mounting brackets. Avoid pinching or trapping
any cables.
REPLACING THE BATTERY
See gure 18.
The mower battery is designed for maximum life; however,
like all batteries, it will eventually need to be replaced.
Charge the new battery pack before use. See charging
the battery pack in the operation section of this manual.
To install a new battery:
■ Remove the isolator key.
■ Carefully lift the old battery by the handle.
■ Install the new battery pack.
■ Take the old battery pack to a recycling center that
accepts lead acid/lithium ion batteries. Never dispose
of battery in fire or regular household trash.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authority or retailer for recycling
advice.
Do not dispose of battery packs/batteries
into household waste, re or water. Battery
packs/batteries should be collected, recycled or disposed
of in an environmental-friendly manner.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
(24 pages)
(81 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels