Ryobi D45C Manuel de l'opérateur télécharger pdf (Page 11)

OPERATION

CHUCK REMOVAL

See Figure 10.

Whenever necessary to remove the chuck for

replacement, etc. use the following procedure:

■ Unplug your drill.

WARNING:

Failure to unplug your drill could result in accidental

starting causing serious injury.

■ Rotate torque adjusting ring to the maximum torque

setting.

■ Insert a 8 mm (5/16 in.) or larger hex key into the

chuck of your drill and tighten chuck jaws securely.

■ Tap the hex key sharply with a mallet in a

counterclockwise direction.

See Figure 10.

■ This will loosen the chuck on the spindle.

■ It can now be unscrewed by hand.

See Figure 10.

■ Open chuck jaws and remove hex key

HEX KEY

KEYLESS

CHUCK

MALLET

CHUCK

JAWS

TORQUE

ADJUSTING

RING

Fig. 10

LEVEL

Fig. 9

TO RETIGHTEN A LOOSE CHUCK

The chuck may become loose on the spindle and develop

a wobble.

To tighten, follow these steps:

■ Unplug your drill.

WARNING:

Failure to unplug your drill could result in accidental

starting causing serious injury.

■ Open the chuck jaws.

■ Insert hex key into chuck and tighten chuck jaws

securely. Tap hex key sharply with a mallet in a

clockwise direction.

■ This will tighten the chuck on the spindle.

■ Open the chuck jaws and remove the hex key.

1 2 ... 6 7 8 9 10 11 12 13 14

Commentaires sur ces manuels

Pas de commentaire

Ryobi D45C Manuel de l'opérateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Perceuses électriques Ryobi D45C