Ryobi D50VSR Spécifications télécharger pdf (Page 10)

Page 10

CHUCK REMOVAL

See Figures 10, 11, and 12.

Whenever necessary to remove the chuck for replacement,

etc., use the following procedure for chuck removal:

1. UNPLUG YOUR DRILL.

WARNING:

Failure to unplug your drill could result in accidental

starting causing serious injury.

2. Open chuck jaws. Insert a 5/16 inch or larger hex key

wrench (allen wrench) into the chuck of your drill and

tighten the chuck jaws securely.

3. Tap the hex key wrench sharply with a mallet in a

clockwise direction.

See Figure 10.

This will loosen the

chuck screw for removal.

4. Open the chuck jaws and remove hex key wrench.

Remove the chuck screw by turning it in a clockwise

direction.

See Figure 11.

NOTE: The chuck screw has left hand threads.

5. Insert hex key wrench in chuck and tighten chuck jaws

securely. Tap sharply with a mallet in a counterclock-

wise direction. This will loosen the chuck on the spindle.

It can now be unscrewed by hand.

See Figure 12.

TO RETIGHTEN A LOOSE CHUCK

The chuck may at times become loose on the spindle and

develop a wobble. Also, the chuck screw may become loose

causing the chuck jaws to bind and prevent them from

closing. To tighten, follow these steps:

1. UNPLUG YOUR DRILL.

WARNING:

Failure to unplug your drill could result in accidental

starting causing serious injury.

2. Insert hex key wrench into chuck and tighten chuck

jaws securely. Tap allen wrench sharply with a mallet in

a clockwise direction. This will tighten the chuck on the

spindle.

See Figure 10.

3. Open the chuck jaws and remove hex key wrench.

4. Tighten the chuck screw.

NOTE: The chuck screw has left hand threads.

See

Figure 11.

Fig. 10

Fig. 12

Fig. 11

OPERATION

CHUCK

JAWS

MALLET

HEX KEY WRENCH

(ALLEN WRENCH)

CHUCK REMOVAL

CHUCK TIGHTENING

1 2 ... 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Ryobi D50VSR Spécifications Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Perceuses électriques Ryobi D50VSR