Ryobi P206 Manuel de l'opérateur télécharger pdf (Page 17)

Fig. 17

2 0

MAINTENANCE

CHUCK REMOVAL

See Figures 15 - 17.

The chuck may be removed and replaced by a new one.

n Lock the switch trigger by placing the direction of rotation

selector in center position.

n Insert a 5/16 in. or larger hex key into the chuck of the

drill and tighten the chuck jaws securely.

n Tap the hex key sharply with a mallet in a clockwise di-

rection. This will loosen the screw in the chuck for easy

removal.

TO RETIGHTEN A LOOSE CHUCK

The chuck may become loose on the spindle and develop

a wobble. Also, the chuck screw may become loose, caus-

ing the chuck jaws to bind and prevent them from closing.

To tighten:

n Lock the switch trigger by placing the direction of rotation

selector in the center position.

n Open the chuck jaws.

n Insert the hex key into the chuck and tighten the chuck

jaws securely. Tap the hex key sharply with a mallet in

a clockwise direction. This will tighten the chuck on the

spindle.

n Open the chuck jaws and remove the hex key.

n Tighten the chuck screw.

n Open the chuck jaws and remove the hex key. Using a

screwdriver, remove the chuck screw by turning it in a

clockwise direction.

NOTE: The chuck screw has left hand threads.

n Insert the hex key into the chuck and tighten the chuck

jaws securely. Tap sharply with a mallet in a counterclock-

wise direction. This will loosen the chuck on the spindle.

It can now be unscrewed by hand.

2 0

Fig. 15

2 0

MALLET

CHUCK

JAWS

KEYLESS

CHUCK

HEX KEY

Fig. 16

SCREWDRIVER

MALLET

HEX KEY

1 2 ... 12 13 14 15 16 17 18

Commentaires sur ces manuels

Pas de commentaire

Ryobi P206 Manuel de l'opérateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Perceuses électriques Ryobi P206