Ryobi P210 Manuel de l'opérateur télécharger pdf (Page 15)

2 0

OPERATION

ADJUSTING THE TORQUE

See Figure 11.

The hammer drill is equipped with an adjustable torque clutch

for driving different types of screws into different materials.

Adjust the torque as necessary. We recommend that you use

carbide-tipped bits and select hammer mode when drilling

in hard materials such as brick, tile, concrete, etc.

 Identify the torque indicator settings located on the

front of the hammer drill.

 Rotate the adjusting ring to the desired setting.

• 1 - 4 For driving small screws

• 5 - 8 For driving screws into soft material

• 9 - 12 For driving screws into soft and hard materials

• 13 - 16 For driving screws in hard wood

• 17 - 21 For driving large screws

• For heavy drilling

• For hammer drilling

CHANGING THE BIT ROTATION

See Figure 12.

The direction of the chuck is controlled by the rotation selec-

tor located above the trigger switch.

 For forward rotation: Move the rotation selector to the

left.

 For reverse rotation: Move the rotation selector to the

right.

NOTE: The hammer drill will not run unless the selector

is pushed fully to the left or right.

2 0

Fig. 11

Fig. 12

TO DECREASE

TORQUE

TO INCREASE

TORQUE

ADJUSTING RING

FORWARD / REVERSE

SELECTOR

CENTER POSITION

(LOCK)

REVERSE

FORWARD

DRILLING MODE

HAMMER MODE

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Ryobi P210 Manuel de l'opérateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Perceuses électriques Ryobi P210